
As is well known, one of the key problems facing modern humanity is atmospheric pollution caused by harmful industrial emissions, which negatively affect both the environment and public health. The main goal of this study is to conduct an analytical assessment of the impact of atmospheric air pollution on public health, using molybdenum production as an example. The evaluation includes an analysis of the acute toxic effects of pollutants on public health resulting from emissions of a molybdenum enterprise. The assessment of health risks caused by exposure to chemical air pollutants in the emissions of molybdenum mining enterprises revealed that the individual carcinogenic risk associated with substances such as nitrogen dioxide, dust, ammonia, sodium sulfide, and benzo [a] pyrene (a total of 17 substances) is 0.999.

The purpose of the study is to develop and evaluate the effectiveness of an innovative cargo fastening system using aramid fasteners to improve the safety and stability of cargo transportation. The research methodology included the analysis of existing solutions, the development of conceptual models, mathematical calculations, and the modelling of the system using three-dimensional models. In addition, this study paid special attention to the choice of fastening materials, such as aramid fibre, and analysed the strength characteristics of fasteners to ensure maximum safety of cargo transportation. As a result of the work conducted, an innovative cargo and object fixation system was created, which provides a high level of protection and safety for the cargo, allowing it to avoid damage and emergency situations during transportation. Notably, this system is able to effectively distribute the load and reduce the impact of inertial forces, ensuring stability and reliability during the transportation of goods of various types and sizes. An additional substantial advantage of this innovative solution is its versatility, which allows its successful use in various scenarios and conditions. The technical solution created is suitable for moving both light and heavy loads and can be effectively applied to various types of vehicles. Copyright: © 2025 Nadezhda Dolzhenko, Gulnar Imasheva, Assel Berkesheva, Olga Garmash, and Tasbulat Beketov. This article is an open-access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY 4.0) license.

The article presents the results of enrichment of gold-bearing ore from the Aktobe deposit, containing 1.57 g/t of gold, using flotation and gravity–flotation flowsheets with a closed flotation circuit. The expediency of obtaining gold-bearing concentrate by flotation with one cleaner operation is established. The following process indicators are obtained: the yield of the flotation concentrate is 6.13%; the gold content is 23.01 g/t at the recovery of 89.84%. The comparative analysis of the closed-loop flotation circuit results shows that the obtained indicators in both flotation and gravity–flotation flowsheets are approximately at the same level. The highest process indicators in terms of recovery are obtained using the integrated grinding–centrifugal concentration–flotation flowsheet with one cleaner operation. In this case, gold recovery is 90.56%, which is 0.72% higher than the recovery in flotation flowsheet. The studies on gold cyanidation and adsorption at activated carbon grade Gold Curb 207 C demonstrate low gold recovery, both during cyanidation of the original ore (recovery 62.42%) and during cyanidation of the flotation concentrate (recovery 48.53%). To increase the cyanidation efficiency, the methods of concentrate preparation for cyanidation such as pyrometallurgical treatment (roasting) and mechanical activation (ultrafine grinding) are recommended. © 2025, Ore and Metals Publishing house. All rights reserved.
The study considered ore enrichment waste from the Ashiktas, Akbakai, and Maikain deposits to create sorbents based on silicophosphates. X-ray phase and electron probe elemental analysis were carried out, which confirmed the presence of silicon, aluminosilicate, and other valuable components suitable for the sorbents synthesis. The optimal synthesis temperature (600°C) contributes to the sorbents' porous structure development and a sorption capacity increase concerning Ni2+ ions, allowing them to be used to purify industrial wastewater from heavy metals, which was proven using zeta potential measurements and SEM images.

Extraction of gold from refractory gold-bearing ores in processing with combined flow charts is higher if more gold is extracted by gravity methods before flotation and hydrometallurgical circuits. The article presents the results of gravity beneficiation of refractory gold-bearing ore from the Aktobe deposit with the cyanidation-recoverable gold content of 46.47%. Assessment of the gravity separation efficiency used the GRG-test which found that 35.93% of gold could be extracted in centrifugal concentration. Two flow charts of gravity concentration of ore in the grinding circuits with jigging and centrifugal concentration were tested. The studies find out that the main amount of Aktobe gold has a size less than 0.1 mm, and it is recommended to recover such gold by combining grinding and centrifugal concentration in the integrated processing circuit. © 2024, Ore and Metals Publishing house. All rights reserved.
The properties of phosphate coatings formed on St3 carbon steel were investigated using calcium–manganese–phosphate solutions derived from Zhayrem ore beneficiation wastes and compared with conventional Mazhef salt solutions. Protective performance was evaluated using the drop method, gravimetric tests, and electrochemical techniques. Coatings obtained from the waste-derived solution at 85 °C for 60 minutes exhibited a protective capacity 1.5 times higher than those formed in Mazhef solutions. Electrochemical measurements confirmed this result, with corrosion current densities of 0.974 µA/cm2 for waste-derived coatings, compared to 1.623 µA/cm2 for Mazhef coatings and 2.337 µA/cm2 for uncoated steel. Gravimetric tests showed a lower mass loss over 8 days of immersion (0.0024 g vs. 0.0058 g). SEM and EDS analyses revealed that waste-derived coatings formed dense Ca–Fe–Mn–P layers with a thickness of ~11.1 µm, while Mazhef coatings were thinner (2.96–6.23 µm) and more porous. These findings demonstrate that manganese ore beneficiation wastes are an effective and sustainable source of phosphating agents for producing corrosion-resistant coatings on carbon steel.

The purpose of the article is an experimental study of the impact of the wheelsets of a mainline diesel locomotive on the railway track on straight sections of the track. The measurements were performed on a vibration measuring device consisting of MV25 DV type sensors and an oscillation converter for a digital signal. It is proved that the indicators of dynamic characteristics comply with regulatory requirements. As a result of the conducted research, digital data was collected from the ADC and general monitoring was carried out. Measurement and signal processing are carried out using special software of a personal computer such as a “Notebook”. Vertical static load of a wheelset of a railway rolling stock unit on rails: the load of a railway rolling stock unit on rails attributed to one wheelset, taking into account the actual location of the center of gravity of the superstructure.

This paper presents a structural-parametric synthesis of the four-bar and Stephenson II, Stephenson III six-bar function generating linkages. Four-bar linkage is formed by connecting two coordinate systems with given angles of rotation using a negative closing kinematic chain (CKC) of the RR type. Six-bar linkages are formed by connecting two coordinate systems using two CKCs: a passive CKC of the RRR type and a negative CKC of the RR type. The negative CKC of the RR type imposes one geometrical constraint to the relative motion of the links, and its geometric parameters are defined by least-square approximation. Passive CKC of the RRR type does not impose a geometrical constraint, and the geometric parameters of its links are varied.
Показано 305–312 из 1222