Авторы:
Издательство:
Дата издания
03.10.2025На каком языке издана
ISSN
2578-0611Область исследования
Тип исследования
Аннотация (краткое описание)
The properties of phosphate coatings formed on St3 carbon steel were investigated using calcium–manganese–phosphate solutions derived from Zhayrem ore beneficiation wastes and compared with conventional Mazhef salt solutions. Protective performance was evaluated using the drop method, gravimetric tests, and electrochemical techniques. Coatings obtained from the waste-derived solution at 85 °C for 60 minutes exhibited a protective capacity 1.5 times higher than those formed in Mazhef solutions. Electrochemical measurements confirmed this result, with corrosion current densities of 0.974 µA/cm2 for waste-derived coatings, compared to 1.623 µA/cm2 for Mazhef coatings and 2.337 µA/cm2 for uncoated steel. Gravimetric tests showed a lower mass loss over 8 days of immersion (0.0024 g vs. 0.0058 g). SEM and EDS analyses revealed that waste-derived coatings formed dense Ca–Fe–Mn–P layers with a thickness of ~11.1 µm, while Mazhef coatings were thinner (2.96–6.23 µm) and more porous. These findings demonstrate that manganese ore beneficiation wastes are an effective and sustainable source of phosphating agents for producing corrosion-resistant coatings on carbon steel.DOI
10.30919/mm1765Тип публикаций
Практическое значение
The obtained results demonstrate the practical applicability of Zhayrem ore beneficiation wastes as an effective and sustainable raw material for producing high-performance phosphating solutions for corrosion protection of carbon steel. The developed waste-derived phosphate coatings provide enhanced corrosion resistance and can be used in metallurgy, and metal surface treatment technologies while promoting industrial waste recycling and resource conservation.Квартиль
Источник квартиля
SCImago (Scopus)Impact Factor
2.17Количество цитирований
0Данный документ располагается в коллекциях
Международные публикации ученых SU
Scopus
Файлы документа
mm1765.pdf