
The paper contains the laboratory study results for the flotation processing of gold-containing tailings with the use of the composite reagent (CF). The CF flotation reagent is a microemulsion from a composition of sodium butyl xanthate and reaflot. A gold-containing concentrate was obtained with a gold content of 6,7 g/t with a recovery of 59,71 % in the basic mode. The use of the CF composite flotation reagent increases the gold extraction into the gold-containing concentrate by 3,77 %, as compared with the main collector-sodium butyl xanthate. The con-sumption of CF flotation reagent is reduced by 20 %. © 2022, Faculty of Metallurgy. All rights reserved.

Anthropogenic CO2 emissions are a major driver of climate change, highlighting the urgent need for effective mitigation strategies. Carbon Capture, Utilization, and Storage (CCUS) offers a promising approach, particularly through CO2-enhanced gas recovery (EGR) in shale reservoirs, which enables simultaneous hydrocarbon production and CO2 sequestration. This study employs a numerical simulation model to compare two injection strategies: CO2 flooding and huff-and-puff (H&P). The results indicate that, without accounting for key mechanisms such as adsorption and molecular diffusion, CO2 H&P provides minimal improvement in methane recovery. When adsorption is included, methane recovery increases by 9%, with 14% of the injected CO2 stored over 40 years. Incorporating diffusion enhances recovery by 19%, although with limited storage potential. In contrast, CO2 flooding improves methane production by 26% and retains up to 94% of the injected CO2. Higher storage efficiency is observed in reservoirs with high porosity and low permeability, particularly in nano-scale pore systems. Overall, CO2 H&P may be a viable EGR option when adsorption and diffusion are considered, while CO2 flooding demonstrates greater effectiveness for both enhanced gas recovery and long-term CO2 storage in shale formations. © 2025 by the authors.
The bottom sediment of reservoirs has many functions. Among them, matter sorption is a very important one, and results in many side-effects on the reservoir sediment forming the water–bottom sediment system. As a result, bottom sediment can also be an indicator of anthropogenic water pollution. There is only very little knowledge of this situation in the study area. The main objective was the analysis of heavy metal accumulation in bottom sediment, as well as their ability to migrate throughout the water–bottom sediment system and their spatial distribution in the Kapshagay Reservoir in Kazakhstan. Heavy metal concentrations, in the both water samples and the bottom sediment, were determined using the atomic absorption spectrophotometric method. Surfer software was used to visualize the processes of migration and accumulation. Another objective was the development of model maps of the spatial distribution of metals in the reservoir water area, which indicated significant anthropogenic loads. It is obvious that both the transboundary inflow of the Ili River and the inflow from small rivers in the territory of Kazakhstan are the reasons for the anthropogenic water and sediment load. The results of the spectrometric analysis verify the water pollution in the reservoir, revealing increased concentrations of zinc reaching up to 10.8 µg/L and lead up to 32.7 µg/L, transported by the transboundary runoff of the Ili River and by the small rivers on the left bank into the Kapshagay Reservoir. Sediment concentrations close to the central part and dam zone of the reservoir reached the following values: zinc up to 37.0 mg/kg and lead up to 8.8 mg/kg. The results of this study indicate a significant anthropogenic load of the ecological conditions of the Kapshagay Reservoir. This is discussed and compared with other relevant studies. © 2022 by the authors.

In this work, optical properties of perovskite solar cells (PSCs) with planar and nanorod-based SnO2 electron transport layers (ETLs) are studied and their photovoltaic parameters are compared using computer simulation methods. It is found that nanorod-based SnO2 ETLs improve the light harvesting ability of device. However, their power conversion efficiencies (PCEs) are still lower than those with thin planar SnO2 ETLs. © 2023 IEEE.

This study aims to enhance terrorism financing detection mechanisms by analyzing existing patterns in financial transactions. Utilizing advanced data analysis techniques and machine learning models, we identified significant transaction patterns indicative of terrorism financing activities. The proposed models demonstrated improved accuracy and efficiency over traditional detection methods. The findings have substantial implications for financial institutions and regulatory bodies in strengthening financial security and preventing illicit activities. © 2024 IEEE.
Herein, a comprehensive validation of the catalytic and sensing capabilities of gallium sulfide (GaS). This study focuses on the self-assembled heterostructure formed by GaS with its native oxide, revealing novel insights into the crucial role of defects, strain, and surface oxide phases in optimizing the behavior of 2D materials for catalytic and sensing applications. Although the energy barrier for water dissociation on pristine GaS surfaces is prohibitive (+419.3 kJ mol−1), surface sulfur vacancies considerably reduce this barrier, transforming defective GaS (GaSx) into an efficient catalyst for the hydrogen evolution reaction (HER) in alkaline media. Water dissociation is energetically favorable at room temperature on GaS0.96 surfaces (−147.6 kJ mol−1). Correspondingly, the differential free energy for HER on GaS0.96 in an alkaline medium is found to be −1.56 eV for the hydroxyl adsorption step and +1.28 eV for the desorption step, while all reaction steps are exothermic for its implementation as a catalyst for oxygen evolution reaction (OER). These theoretical models and surface-science experiments confirm that exposure of GaS surfaces to ambient conditions leads to the inevitable formation of a self-assembled nanoscale (≈3 nm thick) oxide skin. This native oxide layer stabilizes the surface and, moreover, it also significantly enhances its catalytic and sensing properties by providing additional active sites and improving charge transfer dynamics. The exceptional sensitivity (response of 18% at T = 150 °C) and selectivity for detecting ammonia (NH3) are attributed to both its high affinity for chemisorption and the significant charge-transfer interactions that enhance the sensor response.

The scientific research investigates the neutralization and purification process of harmful microorganisms present in surface water using an ozonator device, which operates based on a pilot electric discharge method. A pilot ozonator based on a special high-frequency electric discharge has been developed for disinfection and cleaning of harmful microorganisms found in surface water. In order to conduct practical tests on scientific research work, special water was taken from the Ili floodplain and an examination of the water composition was carried out. The examination results revealed the presence of several harmful microorganisms in the source water, surpassing the maximum allowable concentration (MPC). Effective economic indicators of ozone content (mg/l), contact time (t, minutes) and the like were determined for disinfection and removal of microorganisms from the water composition. In addition, an algorithm for theoretical calculations for the destruction of harmful microorganisms in 1m3 surface water was compiled and a mathematical model was given. © 2024, Zibeline International Publishing Sdn. Bhd.. All rights reserved.
In the Republic of Kazakhstan, there is a noticeable shortage of water resources, which is a consequence of the natural features of its territory and climate. In particular, there are big problems in the water supply to the Mangystau region. The main source of water in the region is the Samskoye groundwater field. In this work, the conditions of the Samskoye field are typified, the method and technological parameters for drilling a typical well are selected and substantiated. It has been established that rotary drilling with reverse circulation in the conditions of the Samskoye field has significant advantages. The maximum possible production rate of drilling with reverse circulation, taking into account the limited thickness of the aquifer, is 4.3 times higher than with rotary drilling with direct circulation and 2.5 times higher than with percussion drilling. With the same filter pipe diameter, the greatest possible thickness of the gravel pack layer in reverse circulation drilling is 15 times greater than for conventional rotary drilling and 3.7 times greater than for percussion drilling. Thus, the use of rotary drilling with reverse circulation will solve an important problem - the provision of domestic and drinking water supply to the area. © Published under licence by IOP Publishing Ltd.
Показано 961–968 из 1222