
Failure Modes, Effects, and Criticality Analysis are widely used to assess the failure modes of a system, along with their causes and effects. Several Multi-Criteria Decision-Making approaches have been developed to overcome the limitations of the traditional FMECA. In these approaches, several multiple criteria are considered to determine the criticality values and assign criticality ranks. In these developed approaches, only one expert can involve in criticality analysis. By incorporating several experts from design, manufacturing, and maintenance domains in the criticality analysis accuracy of the results can be improved. This paper proposes a new integrated Expert Judgment-based Preference Section Index (ExJ-PSI) model that combines MCDM approaches and integrates expert opinions. The proposed model is applied to a boiler system used in the textile industry. The results are compared with those obtained from the conventional FMECA and normalized median method. In the present study, the opinions of seven experts from various domains and organizations are discussed. To normalize the collected data, one scale is developed by considering four expert criteria, such as the experience of the expert, the number of boilers he is handling, the number of employees under his supervision, and the proficiency in the field. The proposed model is more effective and flexible in handling and analyzing data of complex configured systems consisting of many subsystems, components, and failure modes. The analysis reveals that the feed water pump, feed water pump motor, supply water temperature sensor, return water temperature sensor, header, and coal feed motor are some of the most critical components of the boiler system. © 2022 by the authors.

The industrial and environmental safety of mining at the Zhilandy group of deposits is ensured via identification and prediction of hazardous geodynamic processes and phenomena. This study used and integrated approach including: geological engineering of the structure and tectonics of rock mass with mapping of disturbed, displaced and crushed rock zones, instrumental surveying using electronic tachometer, surface monitoring of pit wall using ground scanning and UAV, examination of displacements at the points of a geodynamic testing area (GTA) points and assessment of the stress strain behavior changes in rock mass using satellite geodesy technologies. The methodology for integrated geodynamic monitoring is developed. The new method for GTA creation is proposed. The study results were implemented at existing mine within the R&D projects, namely, “Comprehensive monitoring of slow deformation processes of the earth’s surface during large-scale ore mining in Central Kazakhstan” and “Highly effective methodology for monitoring geotechnical conditions in rock mass to assess and predict deformation processes during mineral mining”, and also in the educational process at the Satbayev University. The implemented R&D resulted in creation and commissioning of: — the geodynamic testing area in the region; — the designs of permanent (ground and underground) forced centering points (FCP) allowing an increase in observation efficiency and accuracy; — the pit wall reinforcement method and the method of the stress–strain behavior prediction in rock mass; — the composition of the mine waste solution to reinforce the disturbed pit wall areas. The novelty of the developed methods and means is confirmed by the patents of invention of the Republic of Kazakhstan. The GTA creation at mineral deposits in Central Kazakhstan is a reliable framework for the long-term monitoring of the earth’s surface deformation during large-scale mineral mining, allowing the enhanced efficiency and accuracy of observations. The results obtained can be used to improve the level of industrial safety at mines and minimize the environmental risks caused by subsoil development. © 2024, Ore and Metals Publishing house. All rights reserved.

Zinc oxide (ZnO) and materials based on it are often used to create battery-type supercapacitor electrodes and are considered as promising materials for hybrid asymmetric supercapacitors. However, when creating such electrodes, it is necessary to take into account the instability and degradation of zinc oxide in aggressive environments with a non-neutral pH. To the best of our knowledge, studies of the changes in the properties of ZnO-containing electrodes in alkaline electrolytes have not been carried out. In this work, changes in the structure and properties of these electrodes under alkaline treatment were investigated using the example of ZnO-containing composites, which are often used for the manufacturing of supercapacitor electrodes. Supercapacitor electrodes made of two materials containing ZnO were studied: (i) a heterogeneous ZnO-Co3O4 system, and (ii) a hexagonal h-Zn-Co-O solid solution. A comparison was made between the structure and properties of these materials before and after in situ electrochemical oxidation in the process of measuring cyclic voltammetry and galvanostatic charge/discharge. It has been shown that the structure of both nanoparticles of the heterogeneous ZnO-Co3O4 system and the h-Zn-Co-O solid solution changes due to the dissolution of ZnO in the alkaline electrolyte 3.5 M KOH, with the short-term alkaline treatment producing cobalt and zinc hydroxides, and long-term exposure leading to electrochemical cyclic oxidation–reduction, forming cobalt oxide Co3O4. Since the resulting cobalt oxide nanoparticles are immobilized in the electrode structure, a considerable specific capacity of 446 F g−1 or 74.4 mA h g−1 is achieved at a mass loading of 0.0105 g. The fabricated hybrid capacitor showed a good electrochemical performance, with a series resistance of 0.2 Ohm and a capacitance retention of 87% after 10,000 cycles. © 2024 by the authors.

Atmospheric carbon dioxide (CO2) levels increased from 419.3 ppm (ppm) in 2023 to 425.4 ppm in 2024, 51 % above preindustrial levels, with emissions rising from 37.01 to 37.41 billion metric tons. This surge has driven record global temperatures, with annual mean surface temperatures reaching 1.45 °C and 1.55 °C above preindustrial averages in 2023 and 2024, intensifying glacial melt, sea-level rise, and extreme weather events. Photocatalytic CO2 reduction to methane (CH4) has emerged as a promising pathway to mitigate CO2 emissions while producing an energy carrier compatible with existing infrastructure. This review focuses on advancements in photocatalysts based on graphitic carbon nitride (g-C3N4) for photocatalytic CO2-to-CH4 conversion, offering a sustainability-centered perspective often overlooked in previous reviews. In addition to summarizing progress in dopant integration, heterojunction formation, and charge separation strategies, this work critically examines the environmental footprint of precursor materials and the energy consumption of thermal, microwave, and plasma-assisted synthesis methods. It highlights the potential of solar and LED light sources as scalable, energy-efficient alternatives to conventional lamps. The review also addresses practical challenges such as CO2 purification, impurity tolerance in exhaust-fed systems, and the feasibility of CH4 recovery and separation. Furthermore, it explores the integration of photocatalytic CO2 reduction with emerging approaches like direct air capture, electrocatalysis, biophotocatalysis, and computational tools including machine learning and multiphysics modeling. By aligning CH4 production performance with system-level sustainability criteria, this review establishes a framework to guide future developments toward environmentally viable photocatalytic CO2-to-CH4 technologies. © 2025 Elsevier B.V.

The ground source heat pump heating system is considered as one of the best solutions for the transition towards green heating under the continental climate conditions like Kazakhstan. In this paper, experimental and theoretical investigations were carried out to develop a ground source heat pump-based heating system under the weather conditions in Kazakhstan and to evaluate its thermodynamic performance. The water-to-water heat pump heating system, integrated with a ground source heat exchanger and used refrigerant R134a, was designed to provide hot water to meet the requirements for space heating. The predicted values of the coefficient of performance and the experimental results were found to be in good agreement within 6.2%. The thermodynamic performance of the system was also assessed using various environment-friendly refrigerants, such as R152a, R450A, R513A, R1234yf and R1234ze, as potential replacements for R134a. Although R152a is found to be a good alternative for R134a in terms of coefficient of performance and total equivalent warming impact, its flammability hinders its application. The heating system using refrigerants R450A, R513A, R1234yf and R1234ze shows 2–3% lower coefficient of performance than that of R134a. The highest exergy destruction is found to be attributed to the compressor, followed by the expansion valve, evaporator, and condenser. Considering their low flammability and low environmental impact, R450A, R513A, R1234yf and R1234ze are identified as valuable replacements for R134a. © 2022 by the authors.

Developing multifunctional flame retardants (FRs) has become a strategy to reply on needs for advanced polymers. Self-healing polymers are an emerging class of advanced polymeric materials, which have been upgraded progressively, and recently have taken the advantage of fire safety. Correspondingly, diverse industries like aerospace, automotive, construction and consumer electronics are benefited from flame-retardant self-healing polymeric materials, which underlines their increasing contribution to modern technologies. The self-healing characteristics stem from intricate chemical and physical interactions, adopting self-directed repair mechanisms leading to eliminating the need for frequent replacements, subsequently lowering maintenance costs and environmental impact. This review summarizes advantages of self-healing polymers with emphasis on exploring highly innovative advancements among bio-based hydrogels, aerogels, coatings, thin films, lithium-ion batteries and advanced ionotronic skin (-i-skin) structures embedding sensing features for smoke detection and flame exposure warnings, further broadening their application in smart technologies and safety-critical infrastructure. The outcomes of reports outline challenges remaining in developing such multifaceted materials in view of lack of information due to limited or exclusive investigations. However, further research may facilitate exploring dehydration, thermal shielding, and free radical quenching mechanisms contributing to flame retardancy performance of flame-retardant self-healing polymers. Sustainability and circular economy requirements are briefly discussed, in addition to outlining remarks on future developments. © 2024 Wiley Periodicals LLC.

This study analyzes the relationship between gold and oil prices and the stock market returns of Kazakh energy companies during and after the COVID-19 pandemic. We considered the period between 01.01.2020 and 31.12.2021 as the pandemic period and the period between 01.01.2022 and 31.03.2023 as the post-pandemic period. Then we performed a Granger causality analysis to identify the effect of gold and oil market returns on assets traded in the stock exchange. The data was retrieved from the website https://www.marketwatch.com/. Our findings are important in terms of proving the existence of an interaction between the Kazakhstan stock market and international markets. We have found that the gold prices had a causal effect on KZAP both in the pandemic period and in the post-pandemic period, while the oil prices had a causal effect on KZAP only during the pandemic period. We also found no causal effect of the international market prices on the KEGC and KZTO returns. However, this does not prove that there is no relationship between the international market returns and the returns of energy companies traded on the Kazakhstan stock exchange. The relationship between the international market returns and the returns of Kazakhstan stock market energy companies, if there is any, and whether it can be generalized to the long term can be analyzed by cointegration analysis and Vector Error correction model (VECM) methods. © 2023, Econjournals. All rights reserved.

The paper presents the results of laboratory studies on the removal of phosphate in a wastewater treatment plant by adding sludge formed at the water treatment plant (water treatment sludge—WTS) in the city of Astana (Kazakhstan). Raw WTS from the sludge drying beds was used in the study, and the content of chemical compounds present in the dry sludge residue was determined, yielding 10.8–14.6% aluminum oxide (Al2O3) and 4.58–5.31% iron oxide (Fe2O3). The sludge moisture ranged from 90.5 to 95.6%, and the ash content ranged from 51.3 to 63.9%. The raw sludge from the WTP was added to the wastewater collected before the sand trap and after biological treatment. On the basis of the obtained test results, it was found that the effect of phosphate removal depended primarily on the sludge dose and was above 90% when adding 50 mL of sludge to 1 L of sewage. To a lesser extent, the effect of phosphate removal was dependent on the contact time of the sludge with the wastewater and the place where the wastewater sample was taken. © 2023 by the authors.
Показано 761–768 из 1222