
Авторы:
Издательство:
Дата издания
18.08.2024На каком языке издана
ISSN
22110984Область исследования
Тип исследования
Аннотация (краткое описание)
In this work, we studied the kinetostatics and stress-strain state of the links of the actuator mechanism of the exoskeleton of the lower limb. The main results of the work include obtaining reaction values in the kinematic pairs of the mechanism, analysis of the stress-strain state of the links in various positions of the mechanism in the support phase. In the load transfer phase, only the gravity forces of the links and the human foot are applied to the mechanism. Key parameters describing the stress-strain state of the links in this phase were obtained. Particular attention is paid to determining the position at which maximum stresses arise in the sections of the links. A comparative analysis of existing exoskeleton designs and new functional capabilities was carried out: a closed kinematic chain, rational structural synthesis, a combined-type actuator mechanism with decomposition of motion by degrees of mobility and with a gravitationally independent topology, which will minimize the number of active power drives. The results of the study can be used to optimize the design of the exoskeleton, as well as to develop recommendations for the use and adjustment of the mechanism in order to reduce stress in the links and increase the efficiency of the device. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2024.DOI
10.1007/978-3-031-67569-0_36Тип публикаций
Практическое значение
The practical significance of this study lies in improving the design and operational efficiency of lower-limb exoskeleton mechanisms through detailed kinetostatic and stress–strain analysis. The obtained results provide valuable insights into reaction forces in kinematic pairs and the distribution of mechanical stresses in different working positions of the exoskeleton during the support phase. By identifying the conditions under which maximum stresses occur, the study enables engineers to optimize the geometry and material selection of structural links, thereby increasing the durability and safety of the device. The proposed combined-type actuator mechanism with a closed kinematic chain and gravity-independent topology reduces the number of required active drives, which contributes to lower energy consumption and simpler control systems. From a practical standpoint, these improvements enhance the reliability, comfort, and efficiency of exoskeletons used in rehabilitation and mobility assistance. The results can be applied in the development of advanced assistive devices that reduce mechanical loads on structural components, extend service life, and improve patient outcomes during rehabilitation and daily use.Квартиль
Источник квартиля
SCImago (Scopus)Impact Factor
0.6Количество цитирований
1Данный документ располагается в коллекциях
Международные публикации ученых SU
Scopus