
Авторы:
Издательство:
Дата издания
31.08.2023Область исследования
Тип исследования
Аннотация (краткое описание)
The inhibitory properties of various phosphate inhibitors were studied on low-carbon steel (St3) in 3% sodium chloride solution. Standard gravimetric method and electrochemical measurements were used. It has been shown that adding calcium manganese phosphate to a 3% NaCl solution in concentrations of 5-100 mgP2O5/l reduces the corrosion rate of St3. The inhibitor efficiency at 100 mgP2O5/l is 91.8%. Adding sodium polyphosphate at concentrations of 1-20 mgP2O5/L to the chloride solution increases the corrosion rate of St3. The inhibitor efficiency of NaPO3at 100 mgP2O5/l is 24.4%. The results of electrochemical tests obtained by taking and calculating polarization curves confirm the data of gravimetric measurements. Using electron microscopy, it has been shown that uneven loose deposits with low protective properties are formed on the steel surface in a 3% sodium chloride solution both without additives and with sodium polyphosphate additives. When sodium chlo-ride (Ca, Mn)(PO3)2is added to the solution, ordered fine-grained deposits with high protective properties are formed on the steel. IR spectroscopic analysis of deposits formed on the surface of St3 in 3% NaCl solution with addition of various phos-phates was performed. It has been found that uniform coatings containing insoluble calcium hydrophosphates are formed in the presence of (Ca, Mn)(PO3)2.DOI
https://doi.org/10.51301/ejsu.2023.i4.04Тип публикаций
Практическое значение
The practical significance of this study lies in identifying calcium manganese phosphate, (Ca, Mn)(PO₃)₂, as an effective corrosion inhibitor for low-carbon steel (St3) in chloride-containing environments. The inhibitor demonstrated a high protection efficiency of 91.8% in 3% NaCl solution, significantly reducing steel corrosion compared to sodium polyphosphate. The formation of uniform, fine-grained protective coatings containing insoluble calcium hydrophosphates enhances the durability and service life of steel structures exposed to saline conditions. These findings can be applied in water treatment systems, marine infrastructure, pipelines, storage tanks, cooling systems, and other industrial facilities where chloride-induced corrosion is a major concern. The use of calcium manganese phosphate may reduce maintenance costs, improve operational reliability, and provide a more effective corrosion protection strategy for steel equipment operating in aggressive environments.Данный документ располагается в коллекциях
Научные издания SU
Engineering Journal of Satbayev University