Авторы:
Издательство:
Дата издания
15.01.2026На каком языке издана
ISSN
2224-5243Область исследования
Тип исследования
Аннотация (краткое описание)
This paper investigates the effect of partial replacement of cement with fly ash and ground volcanic tuff on the physical and mechanical properties of concrete. The main focus is on the changes in average density and compressive strength at different contents of replacement materials (from 10% to 35%). The investigated concrete composition (27PPPF) without admixtures has an average density of 1925.5 kg/m³ and compressive strength of 40.1 MPa. The results show that when fly ash is added, the concrete strength first increases, reaching a maximum value of 41.6 MPa at 10% cement replacement and then decreases to 29.1 MPa at 35% replacement. A similar trend is observed when tuff is introduced, but the peak strength (40.7 MPa) is also reached at 10% replacement, after which the strength gradually decreases to 27.9 MPa at 35%. The average density of the specimens changes insignificantly, being in the range of 1910.4-1928.5 kg/m³, which indicates that the dense structure of the concrete is maintained. Thus, the optimum content of fly ash and tuff in the concrete composition is 10-15%, as these values provide the best mechanical characteristics. Higher dosages of substitutes result in lower strength due to thinning of cement stone and lack of binding properties. This study confirms the possibility of using fly ash and volcanic tuff as effective pozzolanic additives to improve the environmental friendliness and sustainability of concrete. © 2026, Institute of Metallurgy and Ore Beneficiation JSC. All rights reserved.DOI
https://doi.org/10.31643/2026/6445.39Тип публикаций
Практическое значение
This study demonstrates the feasibility of partially replacing cement with fly ash and volcanic tuff in concrete production. The optimal replacement level of 10–15% maintains or improves compressive strength while reducing cement consumption, lowering production costs, and decreasing the environmental impact associated with cement manufacturing. The findings support the use of industrial by-products and natural pozzolanic materials for the development of more sustainable and eco-friendly concrete.Квартиль
Источник квартиля
SCImago (Scopus)Impact Factor
2.9Количество цитирований
0Данный документ располагается в коллекциях
Международные публикации ученых SU
Scopus
Файлы документа
2026-4-5.pdf