
Авторы:
Дата издания
25.04.2025На каком языке издана
Область исследования
Тип исследования
Аннотация (краткое описание)
This paper provides deeper insights into the performance of diamond particulate reinforced refractory composites used for cutting tools in the oil and gas industries. In particular, 25Cdiamond–70.5WC–4.5Co composites were enhanced with zirconia additives in proportions of 4 wt.% and 10 wt.% via the spark plasma sintering method. Wear tests were performed, and the analyses of elemental composition, morphology, and microstructure were completed. It was found that the addition of yttria-stabilized zirconia increased the plasticity of the matrix and thus introduced the ductile fracture mechanism, reducing the role of abrasive wear. As a result, the specific wear rate was reduced by 44% after the addition of 4 wt.% of zirconia and by 80% with 10 wt.% of ZrO2. The presence of zirconia contributed to the increase in the retention force between the matrix and diamond grits, which further reduced the intensity of the abrasive mechanism. © 2025 by the authors.DOI
DOI: 10.3390/ma18091965Тип публикаций
Практическое значение
The experimental results confirmed an improvement of wear resistance of the 25Cdiamond–70.5WC–4.5Co composite after zirconia addition. The composites were sintered in vacuum via an electroconsolidation method with a holding time of 3 min at temperatures of 20–1350 ◦C under a mechanical pressure 30 MPa. The following conclusions can be drawn from the experimental results. 1. The fracture mechanism of the composite 25Cdiamond–70.5WC–4.5Co exhibited a mainly intergranular mechanism, including the interfaces between the matrix and diamond grits. The addition of 4 wt.% and 10 wt.% of zirconia introduced a ductile fracture mechanism due to the increased plasticity of the matrix. Multiple crack branching and transglanular fracture mechanisms contributed to the increased fracture toughness and wear resistance of the composites with the zirconia additive. Interfaces between the matrix and diamond reinforcement became denser and revealed no pores or defects. 2. The zirconia additive improved the wear resistance of the diamond-reinforced composite, reducing the specific wear rate by 44% with a content of 4 wt.% and by 80% with a content of 10 wt.% of ZrO2. This result is consistent with previously published reports indicating a substantial increase of the index of tolerance to abrasion damage 1/(E2H) after the addition of the respective proportions of zirconia. 3. In the composite with a zirconia content of 10 wt.%, a larger percentage of tetragonal phase t-ZrO2 transformed into the densely packed monoclinic one, i.e., m-ZrO2, contributing to the improvement of wear resistance. In the tested composite without zirconia addition, the abrasive wear mechanism dominated, accompanied by the pullout of diamond grit from the matrix and, thus, increased three-body abrasive damage to the soft cobalt matrix. The zirconia additive contributed to the increase of the retention force and reduced the intensity of the abrasive mechanism. These improvements can be attributed to the dispersion hardening of the refractory matrix and subsequent stronger clasping of the diamond grits. These results are important for the further design and fabrication of drill bits with diamond-reinforced composites. Further research will include impact tests and other experiments related to real work conditions of mining tools.Квартиль
Источник квартиля
SCImago (Scopus)Impact Factor
1.18Количество цитирований
4Данный документ располагается в коллекциях
Международные публикации ученых SU
Scopus
Файлы документа
materials-18-01965 (1).pdf