
Авторы:
Издательство:
Дата издания
20.05.2022На каком языке издана
ISSN
13147471Область исследования
Тип исследования
Аннотация (краткое описание)
A significant number of properties of composites based on polycarbonates, unfilled and filled with 10 - 30 % short glass fibers of E-glass, treated with 3-(aminopropyl) triethoxy silane, were studied. The purpose of the study is to determine whether these composites can be used to manufacture impellers for centrifugal pumps. It was found that with increasing the amount of filler, the properties of polycarbonate composites change as follows: in general, the physico-mechanical parameters (all modules, tensile strength), stiffness and flexural strength increase, maximum deformation, as well as elastic and impact resistance decrease somewhat. The volume and surface resistivity decrease, the coefficient of thermal conductivity increases. The main reason for these changes in the properties of the composites is the good adhesion at the polymer matrix-fiber interphase which is attributed to the strong physical interaction due to silane used and as a result of the good wetting of the fibers from the polycarbonate matrix and improved compatibility. Based on the results obtained, it can be concluded that polycarbonate composites, filled with 10 - 30 % short glass fibers can be successfully used for the production of centrifugal pumps impellers, as they meet a significant number of requirements for materials with such application. © 2022,Journal of Chemical Technology and Metallurgy.All Rights ReservedТип публикаций
Практическое значение
The practical significance of this study lies in evaluating the suitability of glass fiber–reinforced polycarbonate composites for the manufacturing of centrifugal pump impellers. The results demonstrate that adding 10–30% short E-glass fibers significantly enhances key mechanical and thermal properties of polycarbonate materials. In particular, the composites exhibit increased stiffness, tensile strength, flexural strength, and thermal conductivity, which are essential for components operating under dynamic loads and high rotational speeds. These improvements are primarily attributed to strong interfacial adhesion between the polymer matrix and glass fibers, enhanced by silane treatment, which ensures better load transfer and structural stability. From a practical standpoint, these composites can serve as an alternative to traditional metallic materials for pump impellers. Their use can reduce component weight, improve corrosion resistance, and potentially lower manufacturing and operational costs while maintaining sufficient mechanical performance. Overall, the study provides a solid material basis for the application of polycarbonate-based composites in centrifugal pump design and other industrial applications requiring lightweight, durable, and efficient materials.Квартиль
Источник квартиля
SCImago (Scopus)Impact Factor
1.3Количество цитирований
2Данный документ располагается в коллекциях
Международные публикации ученых SU
Scopus