Traditional methods, such as chemical vapor deposition (CVD), often require toxic and flammable organic reagents or result in a high carbon footprint, raising both health and environmental concerns. In this paper, we present an improved method for synthesizing hexagonal boron nitride (h-BN) nanoparticles using affordable and widely available precursors, boric acid, and urea. Our approach modifies the conventional techniques by introducing a two-step thermal treatment process, with nitrogen serving as an inert atmosphere and hydrogen as a diffusing agent. The resulting h-BN nanoparticles exhibit remarkable uniformity and high crystallinity. Characterization through scanning and transmission electron microscopy (SEM, TEM), high-resolution TEM (HR-TEM), selected-area electron diffraction (SAED), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) confirmed the formation of amorphous nanoparticles with an average size of 10 nm during the initial heat treatment at 600 °C under a nitrogen atmosphere. Further heat treatment at 1000 °C in a nitrogen-hydrogen gas mixture led to the crystallization of highly uniform h-BN nanoparticles, reducing their size to approximately 6 nm. This method ensures high morphological homogeneity and product purity, making it effective for the large-scale production of h-BN nanoparticles. © 2025 Elsevier Ltd

Groundwater is the main source of water for drinking, household use, and irrigation in Kabul; however, the water table is dropping due to the excessive extraction over the past two decades. The groundwater restoration criteria selection mainly depends on the techniques used to recharge the aquifer. The design of infiltration basins, for example, requires different technical criteria than the installation of infiltration wells. The different set of parameters is relevant to water being infiltrated at the surface in comparison with water being injected into the aquifers. Restoration of the groundwater resources are complicated and expensive tasks. An inexpensive preliminary investigation of the potential recharge areas, especially in developing countries such as Afghanistan with its complex Upper Indus River Basin, can be reasonably explored. The present research aims to identify the potential recharge sites through employing GIS and Analytical Hierarchy Process (AHP) and combining remote sensing information with in situ and geospatial data obtained from related organizations in Afghanistan. These data sets were employed to document nine thematic layers which include slope, drainage density, rainfall, distance to fault, distance to river channel, lithology, and ground water table, land cover, and soil texture. All of the thematic layers were allocated and ranked, based on previous studies, and field surveys and extensive questionnaire surveys carried out with Afghan experts. Based on the collected and processed data output, the groundwater recharge values were determined. These recharge values were grouped into four classes assessing the suitability for recharge as very high (100%), high (63%), moderate (26%), and low (10%). The relative importance of the various geospatial layers was identified and shows that slope (19.2%) is the most important, and faults (3.8%) the least important. The selection of climatic characteristics and geological characteristics as the most important criteria in the artificial recharge of the aquifer are investigated in many regions with good access to data and opportunities for validation and verifications. However, in regions with limited data due to the complexities in collecting data in Afghanistan, proper researching with sufficient data is a challenge. The novelty of this research is the cross-disciplinary approach with incorporation of a compiled set of input data with the set of various criteria (nine criteria based on which layers are formed, including slope, drainage density, rainfall, distance to fault, distance to river channel, lithology, ground water table, land cover, and soil texture) and experts’ questionnaires. The AHP methodology expanded with the cross-disciplinary approach by adding the local experts´ questionnaires survey can be very handy in areas with limited access to data, to provide the preliminary investigations, and reduce expenses on the localized expensive and often dangerous field works. © 2022 by the authors.

The relevance of the study is conditioned by the need for practical development and implementation of integrated solutions for the decentralisation of power supply to various geographical regions suffering from a shortage of electric energy due to pronounced problems with the energy supply. The purpose of this study is to identify the main aspects of the development of integrated solutions for the decentralisation of energy supply to power-hungry regions, which may be of significant practical importance from the standpoint of improving the quality of energy supply to such regions. The leading methodological approach in this study is a combination of methods of system analysis of existing principles for the development of integrated solutions for the decentralisation of electricity supply to regions suffering from power shortages, with an analytical investigation of various aspects of electricity supply to power-hungry regions, which is of significant practical importance in terms of improving the quality of electricity supply to remote settlements and districts of the Republic of Kazakhstan. The results obtained clearly indicate the existence of significant prospects for the use of alternative sources of electricity in the issues of decentralisation of power supply to power-hungry regions, and also demonstrate the sequence of development and practical implementation of integrated solutions aimed at timely solving this problem, aimed at meeting the demand for electric energy of residential facilities in these regions and industrial production located in them. The results of this study and the conclusions formulated on their basis are of significant practical importance for employees of power supply systems, who solve practical issues of electric energy supplies to remote geographical regions suffering from power shortages. © 2022 Elsevier Inc.

This study investigates the effectiveness of various polymer types, including hydrophobically modified polymers, polysaccharides, and synthetic polyacrylamides, in enhancing oil recovery and reducing environmental impact. This research aims to comprehensively evaluate the effectiveness of polymer compositions in flow-correcting technologies for oil production. Experimental research conducted at Satbayev University in 2024 evaluated polymer solutions under simulated high--temperature and high-salinity reservoir conditions, examining their potential to improve fluid viscosity, control filtration processes, and optimize hydrocarbon extraction. The research revealed significant technological advantages of polymer compositions, demonstrating their ability to create stable emulsions, reduce water recovery, and improve oil displacement profiles. Hydrophobically modified polymers increased reservoir fluid viscosity by 30%, while synthetic polyacrylamides showed remarkable adaptability to diverse geological conditions. Economic analysis indicated that polymer technologies could increase oil recovery by approximately 43% without requiring additional well drilling, thus reducing capital expenditures. Despite challenges related to temperature stability and economic considerations, the study concludes that polymer compositions represent a promising strategy for sustainable and efficient oil production, offering technological flexibility and improved resource management. © 2025. The Author(s).

This study analyzes 105 coal ash samples from Jurassic and Carboniferous coals from five mines in Kazakhstan, Lenin, Saradyr, Bogatyr, Maikuben, and Shubarkol, focusing on the inorganic elemental compositions, their occurrence, and industrial and environmental implications. Methods include coal ash yield and volatile matter analysis, mineralogical characterization via low-temperature ash X-ray diffraction (LTA-XRD), and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS). High-temperature ash (HTA) was analyzed using energy-dispersive X-ray fluorescence (EDXRF), highlighting XRF’s potential for rapid multi-elemental analysis. Nine major elements (Al, Si, P, S, Fe, K, Ca, and Ti) and eleven trace elements (As, Cu, Cr, Zn, Pb, V, Ga, Mn, Ni, Y, Yb, and Zr) were identified in HTA samples through EDXRF. SEM and dendrogram analysis confirm their co-occurrence with quartz, kaolinite, pyrite, and accessory minerals such as chalcopyrite, zircon, rutile, and REE-bearing apatite. The elemental content of samples enhances industrial suitability by reducing emissions. Only Yb shows slight enrichment for economic benefits, along with La, Ce, and Nd, while concentrations of potentially toxic elements indicate minimal environmental risk. EDXRF demonstrates its efficiency for large-scale investigations, with all samples analyzed in a few days using automated overnight measurements. This approach shows promise for future studies focusing on trace elements, including REE. © 2024 by the authors.
The optimal ratios of the components of the WC–Co‒CrB2 system have been established, at which a finely dispersed structure is formed with a simultaneous improvement in physical and mechanical properties. It is shown that the introduction of CrB2 (in concentration CCrB2 = 4% wt) leads to a twofold increase in fracture toughness (from KIc = 4.4 MPa ∙ m1/2 to KIc = 9.8 MPa ∙ m1/2) with a slight decrease hardness (from H = 15.1 to 13.9 GPa), as well as to an increase in the ultimate bending (from σ = 2000 to 2500 MPa) and compression (from σ = 5300 to 6000 MPa) strength of sintered composite specimens. Creation of the WC–Co‒CrB2 composite materials with improved mechanical and operational properties is essential for optimizing the designs of drilling tools for various technological purposes, increasing their reliability, energy saving, and improving operational properties. © 2022 «OilGasScientificResearchProject» Institute. All rights reserved.

The industrial waste can cause significant harm to human health and to the environment. Organic dyes in particular are environmentally dangerous since they may cause the death of aquatic life or contaminate the feed chain. Thus, one of the current research fields consists of the development of an inexpensive and environmentally friendly method to purify wastewater from organic contaminants. Among the others, Zinc oxide (ZnO) is considered one of the most effective photocatalysts for the decomposition of organic pollutants in water. In this work, we developed a highly efficient low-temperature and environmentally safe synthesis method to obtain photocatalytically active nanostructured ZnO by chemical precipitation from a solution. The effect of the technological conditions of synthesis on the photocatalytic properties is considered in detail, the correlation with the morphology, structural, and optical properties of the synthesized ZnO samples is determined. It was found that the maximum photocatalytic activity with respect to the decomposition of the dye rhodamine-B (RhB) is achieved for samples synthesized at NaOH molar concentration from 0.4 to 0.7 M; in this case, the sizes of crystallites along the crystallographic direction 002 reach maximum values of ∼42 nm. On the contrary, the sizes of crystallites along the directions 100 and 101 decrease monotonically from 30 to 25 nm with an increase in the molar concentration of NaOH from 0.14 to 1 M. Copyright © 2022 Kedruk, Baigarinova, Gritsenko, Cicero and Abdullin.

Pervaporative desulfurization is a potential method for removing sulfur compounds from liquid hydrocarbon streams, having many advantages over existing methods. This overview covers the fundamentals, recent breakthroughs, and different applications of pervaporative desulfurization. The paper begins by explaining pervaporative desulfurization's core concepts, focusing on how polymeric membranes selectively separate sulfur molecules from liquid hydrocarbons. It explores membrane properties, operating conditions, and feed composition in pervaporative separation. It highlights how pervaporative desulfurization may reduce sulfur content to ultra-low levels and meet strict environmental and fuel quality standards. Finally, this comprehensive review paper concludes with a discussion on the future prospects and research directions in the field of pervaporative desulfurization. It highlights the need for continued innovation in membrane materials, module design, and process optimization, as well as the importance of addressing challenges related to scale-up and industrial implementation. Overall, this review paper provides valuable insights into the advancements, challenges, and potential applications of pervaporative desulfurization, offering a comprehensive understanding of this technology for researchers, engineers, and all parties involved in the development and implementation of sustainable sulfur removal processes. © 2023 The Authors. This is an open access article under the CC BY-NC-ND license.
Показано 689–696 из 1222