
The geologically complex Kyzylzharma groundwater field is located in the south-central part of Kazakhstan in the lower Syr Darya Basin. It supplies the 243,000 population of Kyzylorda City by drinking and agricultural water needs. Numerical modeling was used to predict the consequences of increased groundwater withdrawal for future water supply needs. The results displayed a mean squared error for the groundwater simulations of about 0.6 m and was thus acceptable. The validated transmissivity was between 2 × 10−7 and 2 × 10−5 m/d. These parameters showed that the planned groundwater withdrawal will result in a depression cone reaching 90–100 m below present levels in 2040. Maximum groundwater level drawdown may reach 130 m below present levels. This drawdown increases risks for brackish saltwater intrusion into the main groundwater aquifer. The results point at the depletion of groundwater resources in the Syr Daria Artesian Basin and the risks for groundwater quality, particularly increase in mineralization. The key outcome is the recognition that effective joint management of the Syr Daria Artesian Basin’s groundwater resources, involving both Kazakhstan and Uzbekistan, necessitates development and operation of a joint numerical aquifer model. Building this model is a crucial tool for assessing the sustainable groundwater resources in the region. © 2024 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.

In order to study processes occurring during manufacturing of thin steel sheet by cold rolling and change of energy-power parameters, simulation was performed using engineering software DEFORM 3D, which allows to reflect rolling technology accurately. Model of treatment process was created, output data, modes and temperature of treatment, motion parameters of rolls and sheets were set, material of workpiece was selected and its properties were determined. During simulation of sheets cold rolling process, Lagrange analysis was used, number of simulation steps was 100. Process of plastic deformation of metal along curved grid was investigated, vector displacement field was determined, and it was found that maximum movement of metal occurs under effect of top roll. Distribution of stress-strain state was investigated and maximum stress in strain zone was determined. Distribution of rolling forces and torque was investigated, which allowed to determine their maximum values. Maximum rolling forces and torque were observed at 7-9 th second of treatment, and in future they were reduced due to the fact that pushing force disappeared and steady process began. © Published under licence by IOP Publishing Ltd.
Oil and other fat rich products such as some processed foods can contain unhealthy amounts of trans fatty acids (TFA) and saturated fatty acids (SFA). Diets rich in TFA have been linked to coronary artery disease. It is necessary to quantify and police the type of fat in foods to assess its risk. For the first time, this study quantifies the TFA content in margarines and spreads sold in the Kazakhstan markets in the period from 2015 to 2021. Fatty acid composition, and importantly TFA levels, were determined in 6 brands of margarines and 5 brands of spreads used in the food industry and by consumers directly in 2015–2017, and in 23 brands of margarines and 23 brands of spreads from 2018 to 2021. The study margarines and spreads had 20.0 ± 0.02 % TFA on average until 2018. In contrast, in the period 2018–2021, the TFA average content was 14.2 ± 0.06 % in margarines, and 10.6 ± 0.05 % in spreads, which is still 7.4 and 6 times higher than the regulatory requirements of the Customs Union (Kazakhstan, Russia, Belarus, Kyrgyzstan) and the EU, respectively. The strong cause effect between TFA and cardiovascular diseases urges Kazakhstan and other countries to reduce TFA in commercial products. It also encourages research and implementation of technical measures to provide healthy food products that effectively comply with national and international regulations regarding TFA content. The aim of the study was to analyze changes in the quality of solid fat products produced in Kazakhstan over time, particularly after the Technical Regulations of the Customs Union came into effect on January 1, 2018. © 2025
Purpose. The research purpose is to increase the efficiency of borehole uranium mining by selecting special decolmating solutions and rational parameters of the technology for influencing the seam near-filter zone of geotechnological boreholes, as well as improving the filtration characteristics of the seam, depending on the mineralogical composition of ores and the structure of sediment-forming materials. Methods. The method of X-ray phase analysis was used to study the powders. The core material samples were studied on transparent sections using a LEICA DM 2500 P microscope. The content of the elemental composition of the ores and host rocks in the samples of the productive horizon was controlled using an atomic emission spectrometer. Findings. Based on the research results, quantitative-qualitative characteristics of the host rocks in the productive horizon, sedimentary formations from technological boreholes have been determined, revealing various levels in the productive hori-zon. It has been found that in the Campanian horizon boreholes, ores have a complex structure and multicomponent sedimentary formations, representing a mixture of sediments of mechanical-chemical origin. Originality. The results of quantitative-qualitative, microscopic, thermal research methods of the characteristics of ore-bearing rocks from various horizons at the Syr Darya depression uranium deposit have been studied and comparatively ana-lyzed. The sedimentary formations of technological boreholes in the productive Santonian, Maastrichtian, Campanian horizons of the Northern Kharasan field, Syr Darya depression, have also been sampled and studied. The choice of the most appropriate composition of chemical reagents for dissolution and prevention of sedimentary formation in porous media has been substan-tiated by the microscopic research method. Practical implications. A detailed study and comparative analysis of the characteristics of ores and host rocks in various productive horizons makes it possible to more accurately plan the mining of blocks, minimizing emerging risks. Using the developed combined technology for intensifying borehole uranium mining, it is possible to increase the efficiency of borehole uranium mining and reduce its operating costs. At the same time, the ecological and industrial safety of the work of intensifying the leaching uranium ores increases. © 2022. Z. Kenzhetaev, K. Togizov, M. Abdraimova, M. Nurbekova.

Sodium-ion batteries are emerging as a promising and cost-effective alternative to lithium-ion batteries for large-scale applications. Among various anode materials, hard carbon has become a preferred choice for sodium-ion batteries. This study focuses on synthesizing hard carbon from bio-waste cherries and investigating the impact of nitrogen doping strategies on its electrochemical performance. Using urea as a precursor, post nitrogen doping was found to enhance the structural properties of hard carbon, facilitating better penetration of sodium ions into its internal structure. The results revealed that post nitrogen doping significantly improved the capacity of hard carbon, increasing it from 206 mAh g⁻¹ to 274 mAh g⁻¹ at a current density of 20 mA g⁻¹. Additionally, the post nitrogen-doped hard carbon demonstrated an impressive capacity of 110 mAh g⁻¹ at a high current density of 1 A g⁻¹. These findings underscore the potential of nitrogen doping in optimizing hard carbon for sodium-ion battery applications. © 2025 The Authors

This article is a new robotic arm for cleaning the floor in the toilet with an increased radius of action of the robotic arm type SCARA. The most common current trends in production include short production cycles, low volumes and a wide variety of orders that can be solved with the help of the SCARA robot. With the advent of the COVID-19 virus in the world, the term "cleaning and disinfection" has become one of the most important tools for preventing the population from becoming infected with the virus. The research focuses on the research and implementation of SCARA-type robots and describes the possibilities of using a SCARA-type robot. This article describes the selection and deployment of a SCARA robot in industrial automation. This research project describes the simulation of a new SCARA-type robotic arm with a long reach and sliding mechanism, we have developed a new multi-joint robotic arm for working in confined spaces with an autonomous toilet floor cleaning system.
The article considers the effect of doping with magnesium oxide (MgO) on changes in the properties of lithium-containing ceramics based on lithium metazirconate (Li2ZrO3). There is interest in this type of ceramics on account of their prospects for application in tritium production in thermonuclear power engineering, as well as several other applications related to alternative energy sources. During the investigations undertaken, it was found that variation in the MgO dopant concentration above 0.10–0.15 mol resulted in the formation of impurity inclusions in the ceramic structure in the form of a MgLi2ZrO4 phase, the presence of which resulted in a rise in the density of the ceramics, along with elevation in resistance to external influences. Moreover, during experimental work on the study of the thermal stability of the ceramics to external influences, it was found that the formation of two-phase ceramics resulted in growth in the preservation of stable strength properties during high-temperature cyclic tests. The decrease in strength characteristics was observed to be less than 1%. © 2023 by the authors.

This research introduces a novel convolutional neural network-bidirectional long short-term memory (CNN-BiLSTM) hybrid network for the automatic classification of heart arrhythmias using 12-lead electrocardiograms (ECGs). By merging the spatial feature extraction capabilities of CNNs with the temporal precision of BiLSTM networks, our approach sets a new standard in cardiac diagnostics. The proposed model was tested against the comprehensive CPSC2018 dataset, demonstrating superior performance with an accuracy of 90.67%, precision of 93.27%, recall of 96.35%, and an F-score of 94.78%, surpassing existing state-of-the-art methods. These results underscore the effectiveness of integrating spatial and temporal data analysis, offering a robust and reliable tool for medical practitioners. This study represents a significant advancement in automated ECG analysis, paving the way for improved diagnosis and treatment of heart diseases, and contributing to enhanced patient outcomes in cardiac care. © 2025, Institute of Advanced Engineering and Science. All rights reserved.
Показано 681–688 из 1222