
In Kazakhstan, in connection with the development of new highly reliable products and technologies to increase the industrial and technological level in such areas as space, aviation, transport, etc., it is necessary to master new methods for analyzing and controlling the current technical characteristics of parts and assemblies, both in the manufacturing process and during operation. This is due to the requirements that are imposed on special equipment operated in extreme conditions. The use of integrated micromechanical and fiber-optic multifunctional measuring transducers (MT) is extremely attractive for use in special equipment. In addition, the use of sensors that have increased reliability, reduced size and weight, versatility, and also allow their operation to be diagnosed without dismantling from the measurement object, expands the scope of applications in extreme areas.

This study explores the intensification of molybdenite concentrate processing through a synergistic hydrometallurgical approach using sulfuric acid, nitric acid, and their combination to enhance leaching efficiency while minimizing environmental impact. Molybdenum, a strategic metal widely used in advanced engineering and catalytic systems, presents extraction challenges due to the refractory nature of molybdenite (MoS2). The experimental approach incorporated oxygen sparging and mechanoactivation to improve dissolution kinetics and molybdenum availability. A central composite design (CCD) of response surface methodology (RSM) was employed to develop a predictive model for optimizing the leaching parameters. Acid concentration, temperature, and leaching time were systematically varied, allowing for the identification of statistically significant factor interactions and optimal operating conditions. The model demonstrated strong predictive capability with high adjusted and predicted R2 values, validating its suitability for process optimization. Optimal leaching conditions were identified as 50 g/dm3 HNO3 + 200 g/dm3 H2SO4, a temperature of 95 °C, a leaching time of 240 min, and a solid-to-liquid ratio of 1:6, resulting in a maximum molybdenum extraction efficiency of 72.6%. This performance was attributed to enhanced oxidative decomposition and stable complexation of molybdenum species. This study provides a scalable and environmentally conscious framework for molybdenum extraction, with implications for sustainable metallurgy and industrial applications. © 2025 by the authors.

Freshwater scarcity driven by pollution and climate change necessitates the development of effective water purification methods. There is an urgent need for innovative solutions that can efficiently remove contaminants from water sources. A effective material for the photocatalytic degradation of organic sulfonamide antibiotics from water was developed in this study. A composite of electrospun strontium titanate (SrTiO3) and carbon fibers polyacrylonitrile/strontium titanate (PAN/SrTiO3) was employed for the photocatalytic degradation of sulfamethoxazole (SMX). Scanning Electron Microscopy/Energy Dispersive Spectroscopy (SEM-EDS), Transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used to characterise the composite. The fibers had a thickness of ~250 nm and uniformly dispersed PAN and SrTiO3 particles. A PAN/SrTiO3 composite with a 1:1 mass ratio (20 mg) demonstrated excellent performance, achieving over 90 % degradation at pH 7 and a contaminant concentration of 5 mg/L under ultraviolet (UV) light irradiation during 60 min. The composite was tested for the photodegradation of the major organic pollutant (SMX) in distilled and river water. In river water, the degradation efficiency exceeded 80 % at pH 7 because of the formation of secondary radicals involved in antibiotic degradation. SMX degradation was described using a pseudo-first order kinetic equation using the Langmuir-Hinshelwood model. These results underscore the novelty and significance of the PAN/SrTiO3 composite and demonstrate its high efficiency and potential for large-scale water purification applications. © 2024 Elsevier Ltd

Cross-border cooperation (CBC) projects are essential for both sustainable development and creating an environment for entrepreneurship and investment. There is a strong correlation between the successfulness of implemented projects and the sustainable development of border regions. Because of the One Belt One Road (OBOR) initiative, the management of cross-border projects is becoming increasingly important, as Kazakhstan is located at the intersection of transcontinental corridors between Europe and China. A feature of cross-border interaction is that projects are implemented by different countries together, increasing the risks of cross-border projects. In this regard, it was essential to analyze successful examples of CBC projects to understand better how they affect and contribute to regional development and, based on the information collected, build a successful model of the cross-border and infrastructure projects. This paper explores the issues to build the model to manage cross-border projects successfully. In so doing, the study contributes to the search for critical success factors that underpin the model. There are two contributions to cross-border project management knowledge. The first contribution is in revealing the critical success factors. The second contribution demonstrates how the success model has been built. Our findings are a call for more research connecting the OBOR and project management issues. © 2022, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

In this study, the authors conducted a comprehensive review of the scientific and technical literature in the field of heat transfer in outdoor enclosures with an air layer of composite material, reviewing the effect of solar radiation on these areas. The review of the problem was carried out both at the national scale in the Republic of Kazakhstan and at the international level. It was found that an impressive number of scientists are involved in this topic, which is confirmed by the recent reviews, which analyzed more than 2700 relevant scientific and technical reports. The authors also reviewed the chronology of the development of hinged facade systems made of composite material on an international scale. Following the comprehensive review, a critical analysis was carried out on the most appropriate works, where a number of contradictions and discrepancies in the results were found. Taking into account these circumstances, the authors proposed to investigate the effects of climatic parameters considering barometric pressure. Using the regularity of the ideal gas equation, the dependences on the change in the volume of gas (air) when exposed to temperature loads and the influence of barometric pressure were determined. The results obtained will elucidate future research directions and can be taken into account in further studies of outdoor fences with an air layer considering solar radiation and territorial terrain.

This article presents a digital twin of hot pumping waxy oil through a main pipeline. Digital copies of the original object data were identified through sensor measurements from SCADA and ECMAS, forming the basis of the SmartTranPro 1.7.1 Software. The mathematical model of the software describes the process of hot pumping waxy oil regarding heat exchange with the environment. The intelligent algorithms of the SmartTranPro 1.7.1 Software were used to determine the actual dependencies of the digital twins of the objects, hydraulic parameters, and heat transfer for the Kassymov–Bolshoi Chagan hot main pipeline, which has a length of 450 km. The results of the thermal–hydraulic calculations for the hot pumping of waxy oil are in good agreement with the actual sensor data from SCADA and ECASM. The optimization calculations of the heating temperature for waxy oil show an economic efficiency of 38.9% for the hot pumping method. © 2025 by the authors.
The uncontrolled release of synthetic toxins and micropollutants from industry and consumer sources into freshwater bodies poses a serious risk to aquatic environments and human health. Advanced oxidation processes, specifically heterogeneous photocatalysis, have drawn attention to solve these issues and a possible route to improve the quality of the aquatic environment. This has been obtained by investigating unique materials that can function synergistically with one another. The scientific society has explored different photocatalyst types. Nevertheless, heterojunction photocatalysts in general and binary heterojunction photocatalysts in particular have demonstrated remarkable qualities and unique advantages. The combined impacts of metal oxides (MOx) and metal sulfides (MS) have a dominant synergistic effect. Therefore, metal oxide/metal sulfide heterojunctions are emerging as revolutionary photocatalysts in environmental solutions. Binary composites such as ZnO/ZnS, CuO/CuS, ZnO/CuS, and many others are discussed for their synergetic photocatalytic efficiencies in the degradation of a variety of pollutants, including insecticides, dyes, pesticides, antibiotics, and heavy metals. This review explores multifaceted roles of MOx/MS highlighting the potential of these heterojunctions as a promising pathway towards a more sustainable future. Further, a detailed understanding is provided on how heterojunctions have been employed to catalyze environmental remediation by investigating their different electrical interactions and catalytic capabilities. Finally, the manuscript will recommend guidelines for further advancement in this rapidly evolving, multidisciplinary field of current interest.

The declaration of the movement control order (MCO) in Malaysia has led to the closure of the education sector due to pandemic coronavirus disease 2019 (COVID-19). The teaching and learning (T&L) structure shifted from conventional classroom education to fully online distance learning (ODL). The unprecedented experience of 'home quarantine' has multifaced impacts on students' mental health. The study aimed to obtain the correlation of technical and vocational education and training (TVET) students' depression, anxiety, and stress (DAS) in fully implementing online distance learning. A survey study was used using a quantitative approach and respondent was evaluated by the depression anxiety stress scale-21 (DASS-21). Understudy's t-test and one-way analysis of variance (ANOVA) were utilized to investigate the relationship between these perspectives. Analysis from the DASS-21 inventory revealed that 30% had severe or extremely severe depression, 41% anxiety, and 20% stress among the vocational students. Anxiety showed a hugely significant difference among genders and the department compared to depression and stress. Therefore, the finding suggests that some intervention must ensure online distance learning is conveniently accessible and congenial with practical work for the vocational student syllabus. © 2022, Intelektual Pustaka Media Utama. All rights reserved.

The objects of research are the designs and manufacturing technologies of a combined fiber-optic sensor. It is used in extreme operating conditions. The essence of the task is to study the constructive and technological compatibility of optical and micromechanical principles of simultaneous measurement of several heterogeneous physical quantities. In this regard, the chosen modular conversion principle solves the problem of combined conversion. The developed design and technology of the electro-adhesive connection make it possible to significantly reduce the internal mechanical stresses in the sensor and thereby increase the stability of the combined sensors in extreme operating conditions. Analytical models linking the magnitude and orientation of internal mechanical stresses with the characteristics of temporary stability for complex structures, as a rule, are absent. In practice, the obtained research results can be applied to combined pressure and temperature sensors, pressure and vibration, etc. © 2022, Authors. This is an open access article under the Creative Commons CC BY license

In downhole oil production, a column of pumping and compressor tubing’s is equipped with various operational and technological valves for their intended purpose. Each of these valves has a specific function. Therefore, the basic tubing arrangement may not initially contain a specific valve, the need for which may arise for individual operations during repair and maintenance work. This makes it necessary to carry out labor-intensive work involving special equipment for stopping and silencing wells, lifting underground equipment, completing tubing with the necessary technological valve and its descent into the well. The paper proposes to simplify the layout of a downhole pumping unit and increase its technological capabilities by equipping it with a multifunctional valve, which will allow performing both operational tasks and a wide range of necessary technological operations directly in the well without lifting equipment. © 2024, National Academy of Sciences of the Republic of Kazakhstan. All rights reserved.