
Modern industrial sectors, including mining, geological exploration, and mechanical engineering, play a key role in the economic development of the Republic of Kazakhstan. Their efficient operation depends on the quality of manufacturing and restoration of technological equipment components. However, the production and repair of such components require significant costs, and their restoration in remote areas is complicated by the lack of specialized machinery, leading to additional expenses and downtime. To address these challenges, this study proposes the concept of a mobile 3D printer with an integrated mechanical processing system. The primary focus is on developing a manipulator that ensures precise positioning of the welding nozzle and spindle, which perform key functions in the printing process and subsequent mechanical processing. The manipulator must operate within a workspace range of X ±250 mm, Y ±250 mm, Z ±200 mm. Its selection is justified based on criteria such as structural rigidity and positioning speed. Direct and inverse kinematics problems were solved to determine the working area and dimensions of the manipulator. Homogeneous Denavit–Hartenberg transformation matrices were constructed, and Jacobian matrices were obtained to establish the relationship between input and output velocities and accelerations. The proposed concept has significant potential for the rapid production and restoration of technological equipment components in remote areas. Implementing this technology will reduce production costs, minimize equipment downtime, and enhance the technological independence of industrial enterprises. © 2025, National Academy of Sciences of the Republic of Kazakhstan. All rights reserved.

This study evaluates Alum sludge from drinking water treatment plants for the efficient and cost-effective removal of phosphates from aqueous solutions. Extensive characterization and batch experiments have established that optimal phosphate removal was achieved with a sludge dosage of 20 g L−1 (at an initial phosphate concentration of 100 mg L−1), a pH of 5, a temperature of 23 °C, and a stirring speed of 200 rpm. These conditions significantly reduced phosphate levels, ensuring compliance with legal discharge limits. The Langmuir isotherm, pseudo-second-order kinetic and intraparticle diffusion models best described the adsorption process, highlighting the spontaneous and endothermic nature of the phenomenon. The sludge effectively reduced phosphate concentrations to acceptable levels when applied to dairy effluents. This study underscores the potential of Alum sludge as a viable solution for phosphate management in environmental cleanup efforts. © 2024 Elsevier Inc.
The thermal power industry, as a major consumer of hard coal, significantly contributes to harmful emissions, affecting both air quality and soil health during the operation and transportation of ash and slag waste. This study presents the modeling of aerated concrete using local raw materials and ash-and-slag waste in seismic areas through machine learning techniques. A comprehensive literature review and comparative analysis of normative documentation underscore the relevance and feasibility of employing non-autoclaved aerated concrete blocks in such regions. Machine learning methods are particularly effective for disjointed datasets, with neural networks demonstrating superior performance in modeling complex relationships for predicting concrete strength and density. The results reveal that neural networks, especially those with Bayesian Regularisation, consistently outperformed decision trees, achieving higher regression values (Rstrength = 0.9587 and Rdensity = 0.91997) and lower error metrics (MSE, RMSE, RIE, MAE). This indicates their advanced capability to capture intricate non-linear patterns. The study concludes that artificial neural networks are a robust tool for predicting concrete properties, crucial for producing non-autoclaved curing wall blocks suitable for earthquake-resistant construction. Future research should focus on optimizing the balance between density and strength of blocks by enhancing the properties of aerated concrete and utilizing reliable models. Copyright © 2024 Rudenko, Galkina, Sadenova, Beisekenov, Kulisz and Begentayev.

In settings where environmentally friendly practices and policies are prioritized, sustainability and technological progress thrive, making it essential to study and evaluate innovative approaches. Emerging research in materials science is driving innovative solutions for environmental and aerospace engineering by developing materials that are lighter, stronger, and more sustainable. These advancements not only support greener technologies but also enhance performance, pushing the boundaries of what is possible in aerospace and environmental applications. Innovative Materials for Environmental and Aerospace Applications serves as an inclusive compilation of cutting-edge studies that address important challenges in two connected fields. It explores unique materials and methods that not only strengthen performance but also promote environmental stewardship. Covering topics such as aerospace engineering, hydrogen production, and water purification, this book is an excellent resource for environmental scientists, aerospace professionals, materials scientists, sustainability professionals, academicians, researchers, graduate and postgraduate students, and more. © 2025 by IGI Global Scientific Publishing. All rights reserved.
Glacier retreat has caused the emergence of numerous moraine-dammed glacial lakes (MGL) over the last century which have become research foci in many mountain regions of the world. Outbursts of MGLs have caused destructive floods and debris flows, leading to numerous human casualties and significant material damage. The mountains of South-Eastern Kazakhstan have also become prone to lake outburst floods and related debris flows, specifically in the second half of the 20th century. This paper presents and reviews existing surveys and knowledge along with results of own investigations on the formation of MGLs and the characteristics of lake outburst floods and debris flows in the Kazakh part of Tien Shan. We suggest a workflow to identify the most dangerous types of lakes and provide information about their morphogenetic features and hazard criteria. The number of MGLs increased since the 1970s with more than 160 existing in 2018. Forty were identified as being dangerous. Forty-eight lake outbursts occurred since 1950 with all the documented events happened between end of June and end of August. The most dangerous outbursts were caused by ruptures in ice-cored moraine dams. Outbursts of nine MGLs caused disastrous debris flows, with some occurring repeatedly. The number of outbursts decreased since the year 2000 compared to 1970–2000. However, due to ongoing glacier retreat new lakes are forming at higher altitudes. Their greater potential energy makes possible future outbursts more dangerous. Re-evaluation of existing methods to calculate the water volume and peak discharge based on bathymetric measurements and observed outbursts revealed that the applied equations provide suitable approximations and allow supporting mitigation and prevention measures. Finally, the presentation of implemented measures to lower the water level using siphons or artificial flow channels shows that they can reduce the lake outburst hazards. However, they are associated with risks and financial costs and it needs to be carefully considered whether protection measures of the endangered areas are more cost effective. © 2022 The Authors

Glacial Lake Outburst Floods (GLOFs) have emerged as a critical threat to high-mountain communities and ecosystems, driven by accelerated glacier retreat and lake expansion under climate change. This review synthesizes advancements in remote sensing technologies and methodologies for GLOF monitoring, risk assessment, and mitigation. Through a Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA)-guided systematic literature review and bibliometric analysis of studies from 2010 to 2025, we evaluate the transformative role of remote sensing in overcoming traditional field-based limitations. Central to this review is the exploration of multi-sensor data fusion for high-resolution lake dynamics mapping, machine learning algorithms for predictive risk modelling, and hydrodynamic simulations for flood propagation analysis. This review underscores the importance of these technologies in improving GLOF risk assessments and supporting early warning systems, which are crucial for safeguarding vulnerable high-mountain communities. It addresses existing challenges, such as data integration and model calibration, and advocates for collaborative efforts between scientists, policymakers, and local stakeholders to translate technological advancements into effective mitigation strategies, ensuring the sustainability of these at-risk regions. © 2025 by the authors.
The article discusses the analysis of the state of control of the processes of biogas production from animal waste by methane digestion. The article discusses the problems of synthesis of automated control systems of biotechnological processes under conditions of information uncertainty. The analysis of the current state of control of fermentation stage processes shows that insufficient attention is paid to the problem of synthesis of second-tier banks under conditions of information uncertainty. Construction of mathematical modeling of biosynthetic processes is a kinetic model, where experimental and analytical methods are used due to the difficulty of identifying patterns in microbiological processes. The article discusses the application of methods and algorithms for intellectualization of problem solving in ACS for the synthesis of complex biotechnological objects in conditions of lack of information, that they should be attributed to priority tasks. The results of research on the application of a neuro-fuzzy system for controlling fermentation processes under conditions of uncertainty and multimode of processes, as well as a forecasting algorithm using nonlinear sets and neural networks are presented.
The development of advanced industries of the Republic of Kazakhstan (RK), such as chemical, oil, geological exploration industries, etc. dictates the need to develop promising and resource-saving technologies of manufacturing parts and components of machines and technological equipment. The uninterrupted operation of the above industries directly depends on the quality of manufacturing machines and technological equipment. The carried our studies show that there is a problemof machining large-sized parts when manufacturing and repairing machines and technological equipment. The most problematic issue is machining stepped holes of large diameters. To solve this problem, the design of a special boring bar was developed. It allows simultaneous machining stepped holes of large parts of technological equipment. This article is aimed at studying the effect of the boring bar amplitude-frequency characteristics on the accuracy of machining a large-sized part. It is known that the quality of machining depends largely on durability and rigidity of the boring bar design. In this regard, in this work, by using modeling in the Ansys Workbench computer program, the effect of amplitude-frequency characteristics on the boring bar rigidity and durability was determined. For the amplitude-frequency study, graphs of the radial displacement amplitude and the phase angle dependence on frequencies were obtained. It was established that the radial movement in the boring bar cutter at the optimal frequency v = 20,83 Hz is 9.9 µm and at the resonant frequency Vp = 1167, 1 Hz 67.2 µm, which is almost 7 times more. The durability of the boring bar was also calculated in the Harmonic Response module using the additional Fatigue Tool. As a result, it was revealed that the obtained radial movements are within the permissible limit of the tolerance field and the boring bar durability corresponds to the tabulated data. © 2024, National Academy of Sciences of the Republic of Kazakhstan. All rights reserved.

This work examines concerns associated with traffic analysis applicable within a given region of Almaty City employing real data and modelling approaches. In light of analyzing traffic congestion and accidents, the study unveils the following caveats and research limitations: In order to overcome the above challenges, the study proposes the following ways: The study also has the following achievements: The solution suggested to address the problem is adopting an Adaptive Transport Control System to improve traffic management. By employing simulation models and real data the study aims to enhance traffic flow and the transport system in the Almaty City. The research utilizes SUMO an open-source traffic simulation software to perform simulation settings with consideration of parameters like signal lights, separation of lanes, and probability for appearance of vehicles. Also, in this study, parameters of BPR function are calibrated to improve the modeling of traffic flow in order to support the application of efficient traffic control measures. The analysis shows that even minor changes to the BPR parameters can lead to a dramatic increase in the model's accuracy, which will be useful for understanding the planning of cities. Subsequent work is to conduct studies on these models across diverse datasets and road types, as well as incorporating real-time data to the models, and covering more extensive facets relating to the traffic flow model so as to provide paramount support in enhancing the efficiency of urban transportation systems. © 2024 IEEE.

This paper investigates the application of convolutional neural networks (CNNs), particularly the UNet model architecture, to improve the accuracy of breast cancer tumor segmentation in ultrasound images. Accurate identification of breast cancer is essential for effective patient treatment. However, ultrasound images, often contain noise and artifacts, which can complicate the task of tumor segmentation. Therefore, to highlight the most robust architecture, modifications were made to the original set, including the addition of noise and fuzziness. In this study, a comparative study of five different variants of UNet models (UNet, Attention UNet, UNet++, Dense Inception UNet and Residual UNet) was conducted on a diverse set of ultrasound images with different breast tumors. Using consistent training methods and techniques of augmentation and adding noise to the data, an improvement in segmentation accuracy was highlighted when using the Dense Inception UNet architecture. The results have potential practical applications in the field of medical diagnosis and can assist medical professionals in automatic tumor segmentation in breast cancer ultrasound images. This study highlights the improvement of segmentation accuracy by introducing dense induction into the UNet architecture. Importantly, the Dice coefficient, a key segmentation metric, improved markedly, increasing from 0.973 to 0.976 after data augmentation. The results of the study offer promise to the medical community by offering a more accurate and reliable approach to segmenting breast cancer lesions on ultrasound images. The findings can be implemented in clinical practice to assist radiologists in early cancer diagnosis © 2023, Authors. This is an open access article under the Creative Commons CC BY license