Rapid development of high-tech industries is due to the rare and rare-earth metals used in instrumentation and radio electronics. Their materials are used primarily in the military-industrial and aerospace industries and are of strategic importance for the state. Purpose. To develop a technology of enrichment of difficult-to-enrich rare-earth ore of weathering crust on the basis of combined gravity and flotation enrichment scheme. Methodology. Studies on processing of this mineral raw material were carried out on the basis of gravity-flotation enrichment with obtaining rare-earth concentrate. The enrichment studies were carried out on a selected sample of ore from the deposit. On the basis of sieve and sedimentation analyses, the distribution of the sum of rare-earth elements (∑REE) in ore size classes and enrichment products was studied. Gravity enrichability of ore was determined by fractional analysis. Findings. The method of gravity enrichment using the developed gravity apparatus and flotation enrichment of sand and clay fraction of the studied ore has been developed. Gravity enrichment produced a concentrate containing 1053.76 g/t of rare-earth elements (∑REE), flotation enrichment of the clay fraction of the ore produced a concentrate containing 590.0 g/t of rare-earth elements (∑REE). Originality. The developed ultrasonic aerohydrodeslimator was used for ore desliming. The gravitational technology of processing of hard-to-enrich rare-earth ore of weathering crust with the use of vibrocentrifugal frequency apparatus, which allows to intensify the extraction of fine ore particles, is developed. Rare earth ore of size class -0.045 + 0 mm (clay fraction) and class -2.5+0.045 mm (sand fraction) was subjected to flotation beneficiation.

A hierarchical surface that includes objects with different sizes, as a result of creating local fields, initiates a large number of effects. Micropores in the composition of macropores, as well as nanoclusters of the substance, were detected by scanning electron and atomic force microscopies on the surface of ZnO/Por-Si samples. An identical fractal dimension for all levels of the hierarchy was determined for these structures, which is associated with the same response to external excitation. Photoluminescence studies have shown the presence of localized levels in the band gap, with the probability of capturing both electrons and holes, which ensures charge transitions between energy bands. Decomposition of the electron paramagnetic resonance (EPR) signal into components made it possible to determine the manifestations of various types of interaction between paramagnetic particles, including the hyperfine structure of the spectrum. The ordering of the structure of the substance as a result of sequential annealing in the range from 300 to 500 °C was revealed in the EPR spectrum. This fact, as well as photo- and gas sensitivity for all types of samples studied, confirms the prospects of using these structures as sensors.

The asbestos wastes were exploited for extraction of magnesium by agitation leaching process in atmospheric conditions, using hydrochloric acid as the leaching agent. The study was focused on investigating the kinetics of magnesium leaching. The effects of some variables, including stirring speed (150−300 r/min), leaching temperature (25−90 °C), leaching duration (10–60 min), the concentration of hydrochloric acid (150–300 g/L) and the solid - liquid ratio (1:2–1:5), on the leaching rate were carefully evaluated. It was found that increasing the stirring speed, leaching temperature, and concentration of hydrochloric acid can significantly increase the rate at which magnesium is leached. A comprehensive kinetic scrutinization was performed by fitting the experimental data with exponential kinetic equation, Yander diffusion equation, Drozdov-Rotinyan equation, and Prout-Tompkins equation. Amongst all these tested kinetic equations, the diffusion-controlled process showed a higher goodness-of-fit with experimental data. Thermodynamic aspects were also appraised carefully. The apparent activation energy for the process was calculated to be 19.8 kJ/mol, indicating a relatively low-level energy needed to initiate the process efficiently. Overall, the current study provided insight into how changing certain parameters can affect the overall performance when attempting to extract magnesium from the asbestos wastes by leaching process.

In this study, an enzyme-free electrochemical sensor based on zinc oxide (ZnO) nanorods synthesized by the thermal decomposition of zinc acetate is presented. The suggested approach ensures simplicity, environmental friendliness, and scalability of the process without the use of an autoclave or high pressure. The morphology and structure of the samples are studied using SEM, TEM, XRD, Raman, FTIR, XPS, PL, and UV-Vis spectroscopy. It is found that heat treatment at 450 °C increases the degree of crystallinity, increases the size of crystallites, and reduces the concentration of surface defects, which leads to improved optical and electrochemical characteristics of the material. Beyond conventional sensitivity metrics, our study demonstrates that the selective detection of ascorbic acid (AA) and uric acid (UA) can be achieved by controlling the applied potential on a single ZnO electrode, an approach that leverages differences in redox energetics and surface interaction dynamics rather than complex surface functionalization. It is shown in this work that the synthesized ZnO samples subjected to heat treatment in air at 450 °C exhibit high sensitivity to ascorbic acid (9951.87 μA·mM−1·cm−2; LoD = 1.11 μM) at a potential of 0.2 V and to uric acid (5762.48 μA·mM−1·cm−2; LoD = 1.71 μM) in a phosphate buffer solution (pH 7) at a potential of 0.4 V with a linear range of 3 mM, offering a way to create simplified multicomponent electrochemical biosensors based on potential-controlled selectivity.

Currently, significant progress is being made in the prevention, treatment and prognosis of many types of cancer, using biological markers to assess current physiological processes in the body, including risk assessment, differential diagnosis, screening, treatment determination and monitoring of disease progression. The interaction of protein coding gene CD44 with the corresponding ligands promotes the processes of invasion and migration in metastases. The study of new and rapid methods for the quantitative determination of the CD44 protein is essential for timely diagnosis and therapy. Current methods for detecting this protein use labeled assay reagents and are time consuming. In this paper, a fiber-optic biosensor with a spherical tip coated with a thin layer of zinc oxide (ZnO) with a thickness of 100 nm, deposited using a low-cost sol–gel method, is developed to measure the CD44 protein in the range from 100 aM to 100 nM. This sensor is easy to manufacture, has a good response to the protein change with detection limit of 0.8 fM, and has high sensitivity to the changes in the refractive index (RI) of the environment. In addition, this work demonstrates the possibility of achieving sensor regeneration without damage to the functionalized surface. The sensitivity of the obtained sensor was tested in relation to the concentration of the control protein, as well as without antibodies—CD44.

In the economic sphere, they envisage the creation of their own production facilities to produce fibrous semi–finished products - cellulose and its derivatives based on the wood of various hardwoods from the Central Asian region, whose plantations expand every year. Great attention should be paid to rice and wheat straw. Given that rice straw is not used as feed in animal husbandry and is simply burned, thus damaging the ecology of the country, we consider it necessary to carry out scientific work on the production of semi-finished modified fibrous products from local annual cellulose-containing plants. Waste generated by cutting poplar in the form of branches, sawdust, shavings, etc. can also serve as an additional source of raw wood materials to produce cellulose.

The use of the yurt dates to the 3rd millennium B.C. It was mentioned by the “Father of History” Herodotus, as well as by famous travellers Zemarh, Plano Carpini, Guillaume Rubruk, Ibn-Batuta and many others. The making of yurta and dombra was included in the representative list of non-material historical possessions of people. Today, there is a renewed interest in the construction of yurt dome structures suitable for the modern world. However, the techniques of doing them are not well known. In this context, this research examines the techniques of making dome structures for modern use by the structural mechanic method through the architectonics and design of central cyclic yurts. It explores the structural principles conceptualized and presents the ways to do so. It involves a two-story version of the yurt as a novel design. For instance, the yurt’s second floor’s primary structural components have been upgraded. The solution proposed allows to lower the dome of the yurt up to 0.8 m in winter. However, when it is cold and in case of expected strong steppe winds, the total diameter of the yurt remains the same. The number of uyks has also been reduced by the reduction of the length of two uyks out of three located next to each other, i.e., short side uyks are hinged to the main uyks located between kerege and shanyrak. This solution provides an economy of materials and creates space for the anchors during the movement of the shanyrak.

Highways are one of the main elements of the infrastructure and economy of any state. It is well known that the state and level of development of the country's highways directly affect the main economic indicators – the gross national product, the price level, budget revenues, the level of employment, and others. When developing multicomponent binders, as a rule, a systematic approach is used. New binders are considered complex systems consisting of subsystems or elements, each performing its functions. The elements in the system are not isolated from each other but grouped in such a way as to ensure the practicality of the entire system. It should be noted that any changes in a single element or replacing one element with another usually lead to a change in the properties of the entire system. The elements of the system are interconnected, and the more versatile the connections, the more effective the system is. The researcher's task is to correctly select the elements of the system, considering their properties and contribution to the system's overall structure. Of all types of metallurgical slags, blast furnace slags are the most widely used in the production of building materials due to their leading position in the overall balance, their ability to acquire hydraulic properties during rapid cooling, and others.
Показано 401–408 из 1222