
Metallurgy is one of the leaders in terms of the amount of accumulated waste worldwide. Every year the amount of waste placed in dumps, sludge ponds, tailings ponds only grows. However, at present, tailings, slag, dust, etc. of metallurgical enterprises are considered the most promising for secondary use and the extraction of valuable metals from tailings is an important problem in the world. In Kazakhstan, the technology of processing nickel-cobalt-containing tailings is practically undeveloped. Sokolov-Sarybai Mining Production Association Joint-Stock Company (SSGPO JSC) in Kazakhstan, loses more than 7 thousand tons of nickel and 14 thousand tons of cobalt per year. For processing this type of raw material, a combined technology that includes preliminary roasting and leaching processes is acceptable. The aim of the work is a thermodynamic analysis of the roasting process of wet magnetic separation (wms) tailings of the SSGPO JSC, containing such main components as nickel, cobalt and iron sulfides. Thermodynamic analysis of the roasting of wms tailings in the temperature range from 500 to 750°C showed that in the presence of a limited amount of oxygen, the formation of iron sulfides of the following compositions is possible: Fe0.877S, FeS, Fe2S3, Fe7S8. Nickel and cobalt sulfides are converted into Ni3S2, Ni3S4 and CoS0.89, CoS, respectively. In this temperature range, within the homogeneity region, the transformation of cobalt and nickel sulfides also occurs. The calculated values of the Gibbs free energy confirm the possibility of reactions of formation of low-sulfide compounds and the optimal condition for firing is the temperature range of 600-700°C. Depending on the firing conditions, interconversion of iron, nickel and cobalt sulfides occurs. The results of thermodynamic analysis confirm the possibility of extracting iron, nickel and cobalt from wms tailings in the form of soluble low-sulfide compounds with subsequent extraction from the tailings in the form of individual metal powders. Combined technology for processing this type of raw material will be a good example of the use of circular economy principles.

In recent years, there has been an increased demand for nickel-cobalt-containing batteries, which in turn adds a lot of interest in the production of these metals in large volumes. Due to a contraction of the volume of nickel sulfide ores, the majority of producers consider laterite deposits as a potential source of nickel and cobalt. However, processing laterites by traditional pyrometallurgical methods is economically unprofitable. Research has shown that the use of combined and hydrometallurgical methods can be promising. This article is devoted to a review of the results of research and articles on the extraction of nickel and cobalt from laterite ores over the past 20 years. Current technological schemes for the production of nickel and cobalt using combined manufacturing processes are presented, as well as the results of scientific research on increasing the recovery degree of nickel and cobalt from low-grade refractory laterite ores using preliminary activating roasting, various leaching reagents, oxidizing agents, bacteria, etc. Growing interest in nickel production has also been observed in Kazakhstan and research work on the extraction of target metals from local laterite ores is being intensively carried out. According to the investors’ forecast, the first mining in the republic and full commissioning of nickel production are expected in 2025.

In recent years, there has been an increased demand for nickel-cobalt-containing batteries, which in turn adds a lot of interest in the production of these metals in large volumes. Due to a contraction of the volume of nickel sulfide ores, the majority of producers consider laterite deposits as a potential source of nickel and cobalt. However, processing laterites by traditional pyrometallurgical methods is economically unprofitable. Research has shown that the use of combined and hydrometallurgical methods can be promising. This article is devoted to a review of the results of research and articles on the extraction of nickel and cobalt from laterite ores over the past 20 years. Current technological schemes for the production of nickel and cobalt using combined manufacturing processes are presented, as well as the results of scientific research on increasing the recovery degree of nickel and cobalt from low-grade refractory laterite ores using preliminary activating roasting, various leaching reagents, oxidizing agents, bacteria, etc. Growing interest in nickel production has also been observed in Kazakhstan and research work on the extraction of target met als from local laterite ores is being intensively carried out. According to the investors’ forecast, the first mining in the republic and full commissioning of nickel production are expected in 2025.
Introduction. The development of the mining industry requires increasing the durability and safe tool performance life. For bits of mining drilling machines, this problem is often solved by improving the material of the teeth of these bits. The paper presents the results of a study on the development of a technology for the manufacture of hard-alloy drill bits with increased wear resistance and testing of prototypes when drilling hard rocks. Changes in technology have led to changes in the shape of the tooth. Also, purer tungsten powder was used as the initial component. Research methods. The paper studies carbide teeth of bits manufactured at JSC Almalyk Mining and Metallurgical Combine using standard and modified technology. Its structure and chemical composition were studied. Results and discussion. New methods for performing technological operations for the manufacture of carbide teeth (pins) and steel pin bits are developed and mastered. Tungstencobalt teeth were manufactured using VK10KS (90 %W; 10 % Co) hard alloy, produced using tungsten carbide powder synthesized by carbidization of purified tungsten powder. The shape of the tooth surface was changed from ballistic to semi-ballistic. Metallic cobalt powder was used as a binder. Pin bits of the KNSh40×25 type are made of 0.35 C-Cr-Mn-Si steel. Tests of experimental bits were carried out at several mines, as a result of which its suitability for drilling rocks with a hardness of f` = 14–18 was established. The results of industrial operation showed that the durability of the teeth of bits manufactured by JSC Almalyk Mining and Metallurgical Combine is not significantly inferior to bits from European manufacturers. At the same time, the cost of such bits is several times lower.

This paper presents the results of a study on the development of a processing technology for pyrite–cobalt concentrates to obtain iron oxide pigments (Fe2O3 and Fe3O4) via high-temperature hydrolysis. It was found that, in a single operation, the concentrate can be effectively purified from lead, zinc, and copper, yielding an iron–nickel–cobalt product suitable for further processing by standard technologies, such as smelting into ferronickel. The scientific originality of research concludes in a mechanism of stepwise selective chloride volatilization, which was established as follows: stage I (500–650 °C)—removal of lead; stage II (700–750 °C)—chlorination of copper and iron; stage III (850–900 °C)—volatilization of nickel and cobalt. Microprobe analysis of the powders obtained from high-temperature hydrolysis of FeCl2·4H2O and FeCl3·6H2O revealed the resulting Fe3O4 and Fe2O3 powders with particle sizes 50 μm and 100 μm. A visual color palette was created, corresponding to different Fe3O4/Fe2O3 ratios in the pigment composition—ranging from black (magnetite) to red (hematite)—and potential application areas. For the first time, the new technological scheme was proposed of pigments Fe2O3 and Fe3O4 production from pyrite–cobalt concentrates via combination of oxidized roasting with subsequent chlorination and high-temperature hydrolysis of the products.

It is known a priori that vibrations that occur in the elements of the track structure during the passage of a train load are a superposition of free and forced mechanical vibrations. It has been established that the range of oscillation frequencies of the elements of the track superstructure includes oscillations with a frequency from tens to hundreds and thousands of hertz. However, the influence of vibrations on the track and their dependence, in turn, on the design of the track, have not been fully studied, which causes controversy between specialists in this matter. There is an opinion that in intermediate fastenings, the main role is played by an elastic gasket, which ensures the vertical rigidity of the rail-sleeper assembly. It has been experimentally established that in the frequency range below the frequency of free oscillations of rail fastenings, the force applied to the upper surface of the elastic gasket is transferred to the lower surface in an unchanged form. The article discusses the vibrations that occur in the elements of the upper structure of the track (rails, sleepers, rail fastenings, ballast base) during the passage of a moving load, which significantly affect the strength, and, consequently, the durability of both the elements themselves and the railway track generally. Vibrograms, oscillograms, accelerograms of rail oscillations and their spectra during the passage of TALGO are presented. At present, the VOSSLOH fastening, developed in Germany, has been widely used in the construction of tracks on high-speed railways of the Republic of Kazakhstan. In this regard, there is a need for a comprehensive study of the operation of this type of fastening under a train load.

The article is devoted to the study of dynamic interaction of rail track and freight wagons under increased axial load. In conditions of increasing the freight traffic volumes and axial loads, the importance of accurate understanding of the mechanisms affecting the wear of rail track elements becomes especially important. In this paper the authors have carried out experimental research and comparative analysis of freight wagon trolleys of different models. As a result of dynamic tests of the freight wagon trolleys, the necessary parameters of dynamic qualities of different models of wagons and their optimal values of axial loads of freight wagons are obtained. The necessity of improving the current design of wagon trolleys and reinforcing the design of railway track with the use of R65 type rails and reinforced concrete sleepers is substantiated. According to the data of trolley design comparison of different models, the bending moment and maximum load indices are established. © 2025 UNIVERSITY OF ZILINA. This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits use, distribution, and reproduction in any medium, provided the original publication is properly cited. No use, distribution or reproduction is permitted which does not comply with these terms.

The research purpose is to study the forms of gold occurrence in the Takyr graben alluvial-proluvial deposits in order to develop a low-waste resource-saving processing technology. Methods. At the first stage, in the course of field studies, the geological structure of the site is specified, samples are taken for mineralogical-technological analysis, which includes the following procedures: studying granulometric and mineral composition of detrital material; fractional gravitational beneficiation of the source material; fractional beneficiation of material pre-processed in the autogenous mill (AG mill); studying free (native) and bound gold in beneficiation products, their quantitative assessment. The samples are processed under the three-stage scheme using an autogenous mill for sample preparation. Findings. For the first time, the geological structure of the site has been specified with the identification of the deposits in the Turangi and Tuzkabak suites within its boundaries, as well as granulometric and petrographic composition of gold-bearing deposits, and the specifics of gold bearing. The detrital material, represented by quartz with a sharply subordinate amount of quartzite, quartz diorites and jasperoids, is practically identical in all fractions. Originality. For the first time, various types of gold mineralization have been identified in placer sands: clastogenic, newly-formed hypergene, newly-formed hydrothermal and residual. Fractional beneficiation makes it possible to estimate the gold con-tent in each fraction and gravitational beneficiation products, as well as the ratio of free and bound native gold in different frac-tions. The largest amount of free native gold has been revealed in fractions of-0.25 + 0.1 mm (60%) and-0.074 + 0.044 mm (~40%). Gold is high-grade (96.5%) with an admixture of silver and iron. Together with gold, ilmenite, zircon, scheelite, native bismuth, as well as barite, galena, sphalerite, and dolomite have been identified. Practical implications. The research results make it possible to reassess the prospects of similar objects, to adjust the scheme and methodology for processing stream-sediment samples, to solve the issues of productive sand processing technolo-gy, as well as to improve the efficiency of geological exploration and eliminate the “underestimation” of gold deposits. The results obtained can be recommended for implementation by both domestic and foreign organizations specializing in the exploration and mining of gold deposits
Показано 377–384 из 1222