
Presented universal recommendations for the reduction of crud formation, reviewing various aspects affecting the loss of diluent and extractant due to the formation of a third phase (crud), encountered in many hydrometallurgical plants using copper solvent extraction. In this paper introduce the reasons of the crud formation, description of the stable emulsions containing solid particles and choice of technological scheme. An analysis of operations to be considered in the operation of copper solvent extraction plants is presented, due to the deterioration of copper grade below 0.5% in ore and the increase in aluminum content up to 20–25%. Results of use of extraction properties of modified extractants of ACCORGA series and unmodified extractant Lix984N on pregnant leached solution of the most important deposits (Almaly and Aktogay) are given. It is established that for solutions of Almaly deposit, ACCORGA5640 and unmodified Lix984 extractants have high selectivity to copper. Distribution of iron, silica, and copper ions during extraction was studied, and it was found that high selectivity to copper/iron and copper/silica is possessed by extractant Lix 984N, ACCORGA5640. It was found that for solutions of the Aktogay deposit, the ratio of interphase suspension in both extractants is the same, and phase separation in experiments with the use of extractant Lix 984N was 10 s shorter with the use of extractant ACCORGA5640. It was found that the addition of ACCORGACR60 reagent in the amount of 5-10 ppm also leads to a decrease in the volume of crud by 13%, for a stronger suppression of crud.

This paper investigates the interaction between rolling stock and railway track during the emergency braking of a passenger train. A detailed simulation model of a train consisting of a locomotive and twenty passenger cars was developed in the Universal Mechanism software environment. The model accounts for longitudinal, lateral, and vertical vibrations, as well as nonlinear elastic couplings and random track irregularities. Simulation results show that the estimated braking distance is 583 m, which complies with current regulatory standards. The analysis of coupler forces revealed that braking is generally shockless due to buffer devices, except at the locomotive-first car connection. Derailment is possible only under severe track irregularity conditions, while displacement of the rail-sleeper lattice caused by increased transverse forces does not result in derailment. The findings contribute to improving railway safety assessment and support the development of intelligent monitoring and warning systems for modern "smart train" applications. © The Author(s) 2026. This article is licensed under a Creative Commons Attribution NonCommercial-NoDerivatives 4.0. https://creativecommons.org/licenses/by-nc-nd/4.0/.

The asbestos wastes were exploited for extraction of magnesium by agitation leaching process in atmospheric conditions, using hydrochloric acid as the leaching agent. The study was focused on investigating the kinetics of magnesium leaching. The effects of some variables, including stirring speed (150−300 r/min), leaching temperature (25−90 °C), leaching duration (10–60 min), the concentration of hydrochloric acid (150–300 g/L) and the solid - liquid ratio (1:2–1:5), on the leaching rate were carefully evaluated. It was found that increasing the stirring speed, leaching temperature, and concentration of hydrochloric acid can significantly increase the rate at which magnesium is leached. A comprehensive kinetic scrutinization was performed by fitting the experimental data with exponential kinetic equation, Yander diffusion equation, Drozdov-Rotinyan equation, and Prout-Tompkins equation. Amongst all these tested kinetic equations, the diffusion-controlled process showed a higher goodness-of-fit with experimental data. Thermodynamic aspects were also appraised carefully. The apparent activation energy for the process was calculated to be 19.8 kJ/mol, indicating a relatively low-level energy needed to initiate the process efficiently. Overall, the current study provided insight into how changing certain parameters can affect the overall performance when attempting to extract magnesium from the asbestos wastes by leaching process.

This review presents a modern comprehensive analysis of the physicochemical characteristics of carbon materials for the sorption of gases. The main classes of carbon sorbents are considered as follows: nanotubes, activated carbon, graphene, fullerene, composite materials, and organic vapors. Modern methods of modification of carbon materials are systematized. Particular attention is paid to the effect of particle size, morphology, and porous structure on the kinetics and equilibrium characteristics of adsorption. The results of experimental and theoretical studies of the adsorption of the gases (CO2, SO2, NOx, H2S, NH3, and CO) are analyzed. A comparative economic analysis of carbon materials is carried out, taking into account the cost of production and estimated costs of modification. Modern areas of application of carbon sorbents are analyzed as follows: industrial gas purification, automotive filters, air conditioning systems, personal protective equipment, and gas sensors. Particular attention is paid to the study of the prospects and future of materials. Prospective development directions are considered, including the creation of hierarchically porous structures, the development of self-healing materials, and integration with artificial intelligence to optimize adsorption processes. The cost of graphene and nanotube production is predicted to decrease by 50–70% by 2030, which will lead to an expansion of their commercial application.

In recent years, there has been an increased demand for nickel-cobalt-containing batteries, which in turn adds a lot of interest in the production of these metals in large volumes. Due to a contraction of the volume of nickel sulfide ores, the majority of producers consider laterite deposits as a potential source of nickel and cobalt. However, processing laterites by traditional pyrometallurgical methods is economically unprofitable. Research has shown that the use of combined and hydrometallurgical methods can be promising. This article is devoted to a review of the results of research and articles on the extraction of nickel and cobalt from laterite ores over the past 20 years. Current technological schemes for the production of nickel and cobalt using combined manufacturing processes are presented, as well as the results of scientific research on increasing the recovery degree of nickel and cobalt from low-grade refractory laterite ores using preliminary activating roasting, various leaching reagents, oxidizing agents, bacteria, etc. Growing interest in nickel production has also been observed in Kazakhstan and research work on the extraction of target metals from local laterite ores is being intensively carried out. According to the investors’ forecast, the first mining in the republic and full commissioning of nickel production are expected in 2025. © 2024, Ore and Metals Publishing house. All rights reserved.

In recent years, computer vision has emerged as a key technology for autonomous mobile robots and transportation systems, enabling their ability to perceive the environment and make real-time decisions. One of the most critical and widely demanded tasks is object detection, which is essential for navigation, collision avoidance, and the execution of mission-specific operations. This paper examines experimental studies of computer vision algorithms used for object detection in mobile robots. The focus is on the analysis and comparison of modern methods, including classical image processing algorithms and deep learning-based neural network approaches. The experimental study was conducted in a pipeline system to detect in-pipe defects, which requires high accuracy and robustness of algorithms given the limited computing resources of mobile platforms. Experiments were conducted using various object detector architectures (YOLO, SSD, Faster R-CNN) and lightweight models, such as MobileNet, designed for resource-constrained environments. Algorithm performance was evaluated based on accuracy and processing speed. The results of the study enable the identification of optimal solutions for integrating computer vision systems into mobile robots, ensuring a balance between detection quality and operational efficiency. Furthermore, the study explores the potential adaptation of these architectures for specialized scenarios, such as pipeline inspection, where detecting complex-shaped defects within confined spaces is required.

Zinc and lead are one of the most used metals in the world. The average annual growth rate of the zinc market is about 3.5%. Half of the zinc consumed in the world is used as electroplating, more than 30% is spent on the production of zinc alloys, including for the production of brass and bronze. At present, polymetallic ores are the main raw material for the production of lead and zinc. The production technology includes flotation enrichment of the initial ore raw material with subsequent pyrometallurgical or hydrometallurgical processing of the resulting concentrates. Unfortunately, the reserves of well-enriched sulfide ores are declining, which leads to the need to involve mixed and oxidized ores in the production. Obtaining zinc is also a relatively expensive process, one of the stages of which is the roasting of zinc sulfide concentrates in a fluidized bed furnace using oxygen-enriched air blast. In this regard, technologies aimed at processing hard-to-cut oxidized lead-zinc ores, as well as improving the process of roasting in a fluidized bed, are topical and in demand today. The article presents the technology and method for processing oxidized lead-zinc ore, including high-temperature sulfidizing roasting of oxidized compounds of lead and zinc, the results of roasting carried out in the presence of a high-sulfur sulfidizing agent in the form of pyrite (sulfur content is 45.15%), at molar ratios of metal oxide to pyrite NZnO/NFeS2 and NPbO/NFeS2 equal to 0.1–0.14 for sulfidizing in an air-blown fluidized bed furnace at a flow rate of 10 to 20 l/min, at a temperature of 750–800 °C, with a roasting time of 30–45 minutes. As a result of sulfidizing roasting, the degree of sulfidization reaches 88%, and the subsequent extraction of zinc from the non-magnetic fraction into a froth product in an open flotation cycle is 90% with a content of 23.4% zinc.
The article provides an overview of modern methods of processing mining and metallurgical waste to obtain functional materials such as silicon, rare earth metals, nanoporous silica and other valuable components. The technologies of processing and purification, including hydrometallurgical and pyrometallurgical processes, as well as their applicability to various types of waste generated in the mining and metallurgical complex are considered. Special attention is paid to the environmental aspects and economic efficiency of waste recycling, as well as the possibilities of implementing waste-free processes that reduce environmental pollution. Examples of successful implementation of innovative technologies are given and prospects for the use of recycled materials in various industries are described. The authors emphasize the importance of implementing waste-free processes to reduce environmental pollution. The article also discusses methods for the extraction and processing of silicon and silica, which can significantly improve the properties of the final products. Innovative technologies for processing waste from mining and metallurgical production contribute not only to reducing the volume of waste but also to the creation of new economically profitable materials. The study aims to draw attention to the importance of waste recycling and demonstrates the potential of their use as valuable raw materials, which contributes to sustainable development and efficient use of natural resources. The authors also discuss the prospects for further development of recycling technologies, including the development of new methods and optimization of existing processes, which will increase efficiency and reduce waste recycling costs.
Показано 337–344 из 1222