
The water shortage is currently a major problem for agriculture around the world, and this, in turn, can negatively impact food safety. Therefore, in this article, acrylamide monomer (AAm) was bound by the cross-linking agent N, N′-methylene-bis-acrylamide (MBA) in amounts of 10, 15, and 20 mg along with microcrystalline cellulose (MCC) obtained from sunflower seed husk (SFH) and a biodegradable hydrogel in the soil layer with high sorption capacity was synthesized. As a result of the study, the AAm monomer found to be attached to the MCC matrix via intermolecular hydrogen bonds. The kinetics of swelling of the obtained hydrogels in aqueous, electrolytic and water-ethanol, water-acetone binary solutions at various amounts of cross-linking agent were comparatively studied, and it was found that the water sorption potential of the natural polymer—MCC-based hydrogel (MCC hydrogel)—is high at pH = 6.5 and corresponds to the pH of the soil environment. The study showed that the synthesized hydrogel is optimal when using 10 mg of a cross-linking agent, has mechanical strength, withstands pressure up to 27 MPa, completely decomposes at 796°C, and has good thermal stability. It has been established that the pore sizes of hydrogel with 10 mg of cross-linking agent lie within the range of 313.9 nm-den 3.41 μm and belong to mesoporous materials, where the degree of swelling is 1176%. The MCC hydrogel was saturated with water from the soil within 5 days and collapsed within 35 days, releasing the absorbed water back into the soil, losing 66% of its mass and undergoing biological decomposition. These properties of MCC hydrogel allow it to be used as a “water-retaining material” in agriculture

Nanocellulose has garnered great interest among researchers because of its biodegradability, renewability, biocompatibility, high strength and versatile functionality. The present study focuses on the development of an eco-friendly, benign method to extract cellulose nanofibrils (CNFs) from waste sunflower husks (SFHs) using formic acid hydrolysis. Both CNFs and microcrystalline cellulose (MCC) were obtained in high yields from SFHs. The enhanced colloidal stability of CNFs was evident from the ζ potential values, which ranged from −11.8 to −19.6 mV. Varying yields of CNFs were obtained by differing reaction times, though all were found to be thermally stable. SEM and TEM were used for the morphological analysis. The removal of non-cellulose constituents was confirmed by FTIR spectroscopy. The enhancement of crystallinity upon treatment was examined using XRD analysis. The thermal stability of the cellulose extracted was checked via TGA. The present method of extraction of CNFs and MCC from waste SFHs using formic acid could open a new way of bulk production of nanocellulose fibers for the manufacture of green, value-added products in high-end fields, including electronics, agriculture and biomedicine, among others.

This study employs Density Functional Theory (DFT) calculations and traditional all-atom Molecular Dynamics (MD) simulations to reveal atomistic insights into a task-specific Deep Eutectic Solvent (DES) supported by graphene oxide with the aim of mimicking its application in the natural gas desulfurization process. The DES, composed of N,N,N′,N′-tetramthyl-1,6-hexane diamine acetate (TMHDAAc) and methyldiethanolamine (MDEA) supported by graphene oxide, demonstrates improved efficiency in removing hydrogen sulfide from methane. Optimized structure and HOMO-LUMO orbital analyses reveal the distinct spatial arrangements and interactions between hydrogen sulfide, methane, and DES components, highlighting the efficacy of the DES in facilitating the separation of hydrogen sulfide from methane through DFT calculations. The radial distribution function (RDF) and interaction energies, as determined by traditional all-atom MD simulations, provide insights into the specificity and strength of the interactions between the DES components supported by graphene oxide and hydrogen sulfide. Importantly, the stability of the DES structure supported by graphene oxide is maintained after mixing with the fuel, ensuring its robustness and suitability for prolonged desulfurization processes, as evidenced by traditional all-atom MD simulation results. These findings offer crucial insights into the molecular-level mechanisms underlying the desulfurization of natural gas, guiding the design and optimization of task-specific DESs supported by graphene oxide for sustainable and efficient natural gas purification.

This article addresses calculation of the thermophysical processes occurring in a thermoelectric device (TED) for the correction of cerebral hyperthermia by cooling the head. The computational model consists of solutions to three problems: determination of the temperature field of the head area undergoing cooling; determination of the parameters of the thermoelectric modules (TEM) included in the TED; determination of the characteristics of the heat removal system from the hot junctions of the thermal elements in the thermal modules.

This work explores the mathematical modeling of thermophysical processes within a thermoelectric device (TED) designed for brain cooling. The pressing need to mitigate cerebral hyperthermia, a condition triggered by factors such as strenuous physical activity, elevated ambient temperatures, and various pathological conditions, underscores the significance of this research. The focus of this study is a specialized design—a cooling helmet encompassing the scalp, frontal, and temporal regions. This helmet interfaces with the head through a block of thermoelectric modules (TEM) to facilitate cooling. The mathematical model developed for this research addresses three critical components (i) temperature field calculation, (ii) TEM parameter optimization, and (iii) heat dissipation system. The outcomes of this mathematical modeling endeavor yield temperature profiles at key control points within the TED, depicted in spatial and temporal coordinates, contingent upon the supplied TEM power. Furthermore, the study uncovers essential energy parameters for the thermomodules, encompassing their particular types sourced from the standard TEM selections offered by “Cryoterm” LLC, the manufacturer. Notably, the theoretical investigation into TEDs for brain cooling unveils a pragmatic remedy. The integration of two typical DRIFT-0.8 TEMs from the specified manufacturer within the TED design demonstrates the capacity to reduce brain temperature to 291 K. The characteristics of these TEMs display variation within predefined thresholds, with power outputs spanning from 20 to 80 W, an average temperature difference of 50 K across junctions, supply currents ranging from 3 to 11 A, and power consumption levels ranging from 100 to 500 W. These attributes are complemented by coefficient of performance values ranging from 0.1 to 0.5. This research not only sheds light on the feasibility of employing thermoelectric devices for brain cooling but also lays the foundation for addressing cerebral hyperthermia and advancing neuroprotection applications across various clinical and non-clinical contexts.

The theoretical possibilities of increasing the resolution and sensitivity of a time-of-flight mass spectrometer with orthogonal ion injection are considered. The effects are achieved by using inhomogeneous electrostatic fields of special configurations both in the accelerating and focusing parts of the device – a cylindrical immersion objective and a transaxial mirror, respectively. It is shown that the use of an inhomogeneous cylindrical field of a special configuration as an ion accelerator opens up the possibility of a multiple reduction in the energy spread of ions in injected ion packets, associated with the so-called "turnaround time" and, therefore, a significant (two or more times) increase in the limiting resolution of the mass spectrometer. The use of a transaxial electrostatic mirror as a time-of-flight mass analyzer makes it possible to significantly increase the sensitivity of the mass-spectrometer due to the implementation of triple space-time-of-flight focusing of ion packets. Key features include reduced ion energy spread, increased maximum resolution, and improved sensitivity due to triple focusing in space and time of flight. This research lays the foundation for expanding the capabilities of time-of-flight mass spectrometry, providing a more efficient and powerful tool for a wide range of scientific and industrial applications. The effects are achieved by using inhomogeneous electrostatic fields of a special configuration in both the accelerating and focusing parts of the device – a cylindrical immersion lens and a transaxial mirror, respectively. Numerical calculations of the system – a four-electrode cylindrical immersion lens in combination with a three-electrode transaxial mirror – are presented, which confirm the conclusions of the theory
Abstract This paper presents a comprehensive study aimed at improving the efficiency of unmanned aerial vehicles (UAVs) through the enhancement of their aerodynamic and mechanical structures. The research is based on coupled computational fluid dynamics (CFD) and finite element analysis (FEA). The airflow around the UAV was modeled using the Navier–Stokes equations, while the structural behavior was described by the equations of linear elasticity. A UAV configuration with a wingspan of 1.8 m and a mass-optimized structure was investigated for flight speeds in the range of 10–35 m/s and angles of attack from −5° to +15°. The results of the aerodynamic optimization, including airfoil thickness variation and smoothing of the wing–fuselage junction, showed a reduction in the drag coefficient by 9–12% and an increase in the lift-to-drag ratio by up to 11% in the cruise regime. The structural optimization based on replacing aluminum with a carbon-fiber composite material led to a reduction in the structural mass by 13–16%, a reduction in the structural strength criterion value by 18–22%, as confirmed by the Tsai–Wu failure analysis, and a reduction in wing-tip deflection by 20–25% under 3 g and 5 g load cases, while satisfying strength and stiffness requirements. The obtained results demonstrate that the proposed integrated aerodynamic and structural optimization approach significantly improves the overall performance, efficiency, and operational reliability of UAV systems. © 2026 by the authors.

This paper presents a large-scale empirical study aimed at identifying the optimal local deep learning model and data volume for deploying intrusion detection systems (IDS) on resource-constrained IoT devices using federated learning (FL). While previous studies on FL-based IDS for IoT have primarily focused on maximizing accuracy, they often overlook the computational limitations of IoT hardware and the feasibility of local model deployment. In this work, three deep learning architectures—a deep neural network (DNN), a convolutional neural network (CNN), and a hybrid CNN+BiLSTM—are trained using the CICIoT2023 dataset within a federated learning environment simulating up to 150 IoT devices. The study evaluates how detection accuracy, convergence speed, and inference costs (latency and model size) vary across different local data scales and model complexities. Results demonstrate that CNN achieves the best trade-off between detection performance and computational efficiency, reaching ~98% accuracy with low latency and a compact model footprint. The more complex CNN+BiLSTM architecture yields slightly higher accuracy (~99%) at a significantly greater computational cost. Deployment tests on Raspberry Pi 5 devices confirm that all three models can be effectively implemented on real-world IoT edge hardware. These findings offer practical guidance for researchers and practitioners in selecting scalable and lightweight IDS models suitable for real-world federated IoT deployments, supporting secure and efficient anomaly detection in urban IoT networks. © 2025 by the authors.
Показано 225–232 из 1222