
This scoping review maps 224 empirical studies (205 from a structured Scopus search, 2020–2026, plus 19 from a targeted Central Asia supplement) across four digital technology domains for crop production: IoT and sensor-based systems, UAVs and remote sensing, machine learning and AI, and nanostructured agrochemicals. The review follows the PRISMA-ScR framework and pursues three research questions concerning documented effects and validation limitations (RQ1); cross-cutting barriers in human capital, data governance, and infrastructure (RQ2); and the state of empirical evidence from Central Asia and Kazakhstan relative to international findings (RQ3). Across all four domains, the strongest reported effects occur where the data-to-decision-to-action loop is closed and sustained over multiple seasons, yet most published metrics rest on single-season, single-site, or controlled-environment validation that overstates likely field portability. IoT and selected UAV and ML workflows are closest to operational readiness where maintenance, calibration, and advisory support are sustained. Nanostructured materials remain the least mature domain in agronomic terms. For Central Asia, foundational monitoring and salinity-oriented remote sensing are the most immediately transferable elements; intervention-grade ML and integrated digital systems require local calibration, extension infrastructure, and multi-season field validation that are largely still absent. The review identifies the digital skills gap, incomplete data governance, and underreported total cost of ownership as the principal institutional barriers to scaling. Policy priorities include shifting from technical pilots to multi-season agronomic proof, building intermediary service capacity, and establishing transparent data-governance frameworks before large-scale procurement.

In this work, the possibility of obtaining biohydrogels from carboxymethyl cellulose (CMC) and hydroxyethyl cellulose (HEC) using citric acid (CA) as a cross-linking agent was investigated. CMC and HEC used in the work were synthesized from microcrystalline cellulose obtained from sunflower seed husks (SFH). More specifically, local agricultural waste was used as a raw material source for the monomers used to produce the hydrogel. The chemical and crystal structures of the synthesized hydrogel were analyzed using FTIR and XRD techniques, with comparisons made to the initial monomers.The thermal stability of the synthesized hydrogel was 580°C, and the mechanical strength was 134 kPa. According to the kinetics of swelling in water, it was found that the degree of swelling in the first two hours was 500%. The hydrogel synthesized on the basis of cellulose showed high potential for use as a biodegradable composite sorbent for purification of water from heavy metals, drug delivery and protect plants from drought.
We report a straightforward, single-step microwave-enhanced biosynthesis of silver nanoparticles (AgNPs) via an aqueous leaf extract of Simarouba glauca . This study represents the first use of S. glauca leaf aqueous extract for AgNPs production. The microwave conditions reached their optimal point through ongoing monitoring of the maximum UV absorbance at 454 nm which shows the surface plasmon resonance of AgNPs. The 454 nm absorption peak reached its highest intensity when AgNPs were made through a 70 °C reaction that lasted 3 min which proved the formation of nanoparticles. The three analytical methods of powder dynamic light scattering (DLS), transmission electron microscopy (TEM) and X-ray diffraction (XRD)were used to verify AgNPs formation. TEM images showed spherical silver particles of 5–15 nm synthesized within 3 min via reduction of Ag+ (from AgNO3) by the leaf extract. The XRD results showed that the produced AgNPs contained crystalline structures which SAED confirmed through selected area electron diffraction. The phytochemical screening analysis showed that the extract comprises phenolic compounds which probably function as reducing agents for Ag+ ions. The antimicrobial testing revealed that the synthesized AgNPs demonstrated effective antibacterial properties compared toward different bacterial strains (eight) which included both Gram-positive and Gram-negative bacteria.

This study presents a comprehensive characterization of bentonite from the newly identified Orta Tentek deposit in southeastern Kazakhstan and evaluates the effect of hydro-activation with water on its physicochemical properties. The raw (Ot) and hydro-activated (Ot-H2O) samples were analyzed using X-ray Fluorescence (XRF), X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Brunauer–Emmett–Teller (BET) and Thermogravimetric Analysis (TGA)/Differential Thermal Analysis (DTA) techniques. XRF results revealed that Ot bentonite consists mainly of SiO2(66.2%), Al2O3(18.1%), Fe2O3(8.0%), and Na2O (2.09%), with minor amounts of MgO, CaO, and TiO2The montmorillonite content reached 93%, and the methylene blue adsorption capacity was 93.2%. XRD confirmed that Ot bentonite corresponds to sodium montmorillonite, with an empirical formula of Na~0×2Ca~0×1Al~2Si~4O~10(OH)~2·nH2O. Hydro-activation caused notable structural and textural modifications. The average particle size decreased by ~1.5-fold, while the BET surface area increased from 44.8 to 66.6 m2g-1and the average pore size from 3.2 to 4.2 nm. XRD revealed an increase in interlayer spacing and crystallite size. The methylene blue adsorption capacity also improved to 96%, reflecting enhanced sorption efficiency. The biological activity of Ot-H2O aerobic bacteria increased by 2.4 times compared to Ot, while the biological activity of yeasts and molds increased by 1.8. These findings highlight the Ot bentonite as a promising natural resource. The improved d-spacing favors polymer intercalation in composites, the increased surface area enhances potential as a catalyst support, and the high sorption capacity demonstrates suitability for environmental remediation, drilling fluids, and pharmaceutical applications.

The water shortage is currently a major problem for agriculture around the world, and this, in turn, can negatively impact food safety. Therefore, in this article, acrylamide monomer (AAm) was bound by the cross-linking agent N, N′-methylene-bis-acrylamide (MBA) in amounts of 10, 15, and 20 mg along with microcrystalline cellulose (MCC) obtained from sunflower seed husk (SFH) and a biodegradable hydrogel in the soil layer with high sorption capacity was synthesized. As a result of the study, the AAm monomer found to be attached to the MCC matrix via intermolecular hydrogen bonds. The kinetics of swelling of the obtained hydrogels in aqueous, electrolytic and water-ethanol, water-acetone binary solutions at various amounts of cross-linking agent were comparatively studied, and it was found that the water sorption potential of the natural polymer—MCC-based hydrogel (MCC hydrogel)—is high at pH = 6.5 and corresponds to the pH of the soil environment. The study showed that the synthesized hydrogel is optimal when using 10 mg of a cross-linking agent, has mechanical strength, withstands pressure up to 27 MPa, completely decomposes at 796°C, and has good thermal stability. It has been established that the pore sizes of hydrogel with 10 mg of cross-linking agent lie within the range of 313.9 nm-den 3.41 μm and belong to mesoporous materials, where the degree of swelling is 1176%. The MCC hydrogel was saturated with water from the soil within 5 days and collapsed within 35 days, releasing the absorbed water back into the soil, losing 66% of its mass and undergoing biological decomposition. These properties of MCC hydrogel allow it to be used as a “water-retaining material” in agriculture

Nanocellulose has garnered great interest among researchers because of its biodegradability, renewability, biocompatibility, high strength and versatile functionality. The present study focuses on the development of an eco-friendly, benign method to extract cellulose nanofibrils (CNFs) from waste sunflower husks (SFHs) using formic acid hydrolysis. Both CNFs and microcrystalline cellulose (MCC) were obtained in high yields from SFHs. The enhanced colloidal stability of CNFs was evident from the ζ potential values, which ranged from −11.8 to −19.6 mV. Varying yields of CNFs were obtained by differing reaction times, though all were found to be thermally stable. SEM and TEM were used for the morphological analysis. The removal of non-cellulose constituents was confirmed by FTIR spectroscopy. The enhancement of crystallinity upon treatment was examined using XRD analysis. The thermal stability of the cellulose extracted was checked via TGA. The present method of extraction of CNFs and MCC from waste SFHs using formic acid could open a new way of bulk production of nanocellulose fibers for the manufacture of green, value-added products in high-end fields, including electronics, agriculture and biomedicine, among others.

This study employs Density Functional Theory (DFT) calculations and traditional all-atom Molecular Dynamics (MD) simulations to reveal atomistic insights into a task-specific Deep Eutectic Solvent (DES) supported by graphene oxide with the aim of mimicking its application in the natural gas desulfurization process. The DES, composed of N,N,N′,N′-tetramthyl-1,6-hexane diamine acetate (TMHDAAc) and methyldiethanolamine (MDEA) supported by graphene oxide, demonstrates improved efficiency in removing hydrogen sulfide from methane. Optimized structure and HOMO-LUMO orbital analyses reveal the distinct spatial arrangements and interactions between hydrogen sulfide, methane, and DES components, highlighting the efficacy of the DES in facilitating the separation of hydrogen sulfide from methane through DFT calculations. The radial distribution function (RDF) and interaction energies, as determined by traditional all-atom MD simulations, provide insights into the specificity and strength of the interactions between the DES components supported by graphene oxide and hydrogen sulfide. Importantly, the stability of the DES structure supported by graphene oxide is maintained after mixing with the fuel, ensuring its robustness and suitability for prolonged desulfurization processes, as evidenced by traditional all-atom MD simulation results. These findings offer crucial insights into the molecular-level mechanisms underlying the desulfurization of natural gas, guiding the design and optimization of task-specific DESs supported by graphene oxide for sustainable and efficient natural gas purification.

This article addresses calculation of the thermophysical processes occurring in a thermoelectric device (TED) for the correction of cerebral hyperthermia by cooling the head. The computational model consists of solutions to three problems: determination of the temperature field of the head area undergoing cooling; determination of the parameters of the thermoelectric modules (TEM) included in the TED; determination of the characteristics of the heat removal system from the hot junctions of the thermal elements in the thermal modules.

This work explores the mathematical modeling of thermophysical processes within a thermoelectric device (TED) designed for brain cooling. The pressing need to mitigate cerebral hyperthermia, a condition triggered by factors such as strenuous physical activity, elevated ambient temperatures, and various pathological conditions, underscores the significance of this research. The focus of this study is a specialized design—a cooling helmet encompassing the scalp, frontal, and temporal regions. This helmet interfaces with the head through a block of thermoelectric modules (TEM) to facilitate cooling. The mathematical model developed for this research addresses three critical components (i) temperature field calculation, (ii) TEM parameter optimization, and (iii) heat dissipation system. The outcomes of this mathematical modeling endeavor yield temperature profiles at key control points within the TED, depicted in spatial and temporal coordinates, contingent upon the supplied TEM power. Furthermore, the study uncovers essential energy parameters for the thermomodules, encompassing their particular types sourced from the standard TEM selections offered by “Cryoterm” LLC, the manufacturer. Notably, the theoretical investigation into TEDs for brain cooling unveils a pragmatic remedy. The integration of two typical DRIFT-0.8 TEMs from the specified manufacturer within the TED design demonstrates the capacity to reduce brain temperature to 291 K. The characteristics of these TEMs display variation within predefined thresholds, with power outputs spanning from 20 to 80 W, an average temperature difference of 50 K across junctions, supply currents ranging from 3 to 11 A, and power consumption levels ranging from 100 to 500 W. These attributes are complemented by coefficient of performance values ranging from 0.1 to 0.5. This research not only sheds light on the feasibility of employing thermoelectric devices for brain cooling but also lays the foundation for addressing cerebral hyperthermia and advancing neuroprotection applications across various clinical and non-clinical contexts.

The theoretical possibilities of increasing the resolution and sensitivity of a time-of-flight mass spectrometer with orthogonal ion injection are considered. The effects are achieved by using inhomogeneous electrostatic fields of special configurations both in the accelerating and focusing parts of the device – a cylindrical immersion objective and a transaxial mirror, respectively. It is shown that the use of an inhomogeneous cylindrical field of a special configuration as an ion accelerator opens up the possibility of a multiple reduction in the energy spread of ions in injected ion packets, associated with the so-called "turnaround time" and, therefore, a significant (two or more times) increase in the limiting resolution of the mass spectrometer. The use of a transaxial electrostatic mirror as a time-of-flight mass analyzer makes it possible to significantly increase the sensitivity of the mass-spectrometer due to the implementation of triple space-time-of-flight focusing of ion packets. Key features include reduced ion energy spread, increased maximum resolution, and improved sensitivity due to triple focusing in space and time of flight. This research lays the foundation for expanding the capabilities of time-of-flight mass spectrometry, providing a more efficient and powerful tool for a wide range of scientific and industrial applications. The effects are achieved by using inhomogeneous electrostatic fields of a special configuration in both the accelerating and focusing parts of the device – a cylindrical immersion lens and a transaxial mirror, respectively. Numerical calculations of the system – a four-electrode cylindrical immersion lens in combination with a three-electrode transaxial mirror – are presented, which confirm the conclusions of the theory