
This paper presents a numerical analysis of two hot water storage tank configurations—one equipped with an external heat exchanger (Tank-1) and the other with an internal heat exchanger (Tank-2). The objective is to evaluate and compare their thermal performance during charging and discharging processes. The numerical model is developed by solving a system of ordinary differential equations using the 4th-order Runge–Kutta method, implemented in the Python programming language. The results indicate that Tank-1 demonstrated a higher charging efficiency of 94.6%, achieving full charge in approximately 2 h and 20 min. In comparison, Tank-2 required 3 h and 47 min to reach full charge, with a charging efficiency of 85.9%. During discharge, both configurations exhibited similar behavior, with an efficiency of 13.63% over approximately 33 min. The analysis showed that the external heat exchanger configuration led to more effective thermal stratification, supported by the Richardson number analysis, which indicated a significant effect of buoyancy during charging. This design advantage makes Tank-1 particularly suitable for applications requiring rapid heating and minimal heat loss, such as in cold climates or intermittent demand systems. The numerical model demonstrated reliable predictive accuracy, achieving an RMSE of 6.1% for the charging process and 6.8% for the discharging process, thereby validating the model’s reliability. These findings highlight the superior performance of the external heat exchanger configuration for fast and efficient energy storage, particularly for applications in cold climates. © 2024 by the authors.

In situ leaching represents an efficient and safe method for uranium mining, where a suboptimal well flow rate distribution leads to solution imbalances between wells, forming stagnant zones that increase operational costs. This study examines a real technological block from the Budenovskoye deposit, applying reactive transport modeling to optimize well flow rates and reduce operational time and reagent consumption. A reactive transport model was developed based on mass conservation and Darcy’s laws coupled with chemical kinetics describing sulfuric acid interactions with uranium minerals ((Formula presented.) and (Formula presented.)). The model simulated a technological block with 4 production and 18 injection wells arranged in hexagonal cells over 511–542 days to achieve 90% uranium recovery. Six approaches for well flow rate redistribution were compared, based on different weighting factor calculation methods: advanced traditional, linear distance, squared distance, quadrilateral area, and two streamline-based approaches utilizing the minimum and average time of flight. The squared distance method achieved the highest efficiency, reducing operational costs by 5.7% through improved flow redistribution. The streamline-based methods performed comparably and offer potential advantages for heterogeneous conditions by automatically identifying hydraulic connections. The reactive transport modeling approach successfully demonstrated that multi-criteria optimization methods can improve ISL efficiency by 3.9%–5.7% while reducing operational costs. © 2025 by the authors.
Biomass-based carbon nanofibers (CNF) were synthesized using lignin extracted from sawdust and polyacrylonitrile (PAN) (30:70) with the help of the electrospinning method and subsequent stabilization at 220 °C and carbonization at 800, 900, and 1000 °C. The synthesized CNFs were studied by scanning electron microscopy, energy-dispersive X-ray analysis, Raman spectroscopy, and the Brunauer–Emmett–Teller method. The temperature effect shows that CNF carbonized at 800 °C has excellent stability at different current densities and high capacitance. CNF 800 in the first test cycle at a current density of 100 mA/g shows an initial capacity of 798 mAh/g and an initial coulomb efficiency of 69.5%. The CNF 900 and 1000 show an initial capacity of 668 mAh/g and 594 mAh/g, and an initial Coulomb efficiency of 52% and 51%. With a long cycle (for 500 cycles), all three samples at a current density of 500 mA/g show stable cycling in different capacities (CNF 800 in the region of 300–400 mAh/g, CNF 900 and 1000 in the region of 100–200 mAh/g). © 2022 by the authors.
This work presents the preliminary experimental data on the study of gas release from two-phase lithium ceramics Li4SiO4-Li2TiO3 under neutron irradiation conditions. Experiments were carried out at the WWR-K research reactor (Almaty, Kazakhstan) for ∼4.3 days. The total neutron fluence during the irradiation was ∼1.8·1019n/cm2. In the course of irradiation, two experiments on ceramics heating during irradiation and two experiments with hydrogen isotopes (H2 and D2) supply into the experimental chamber with the sample were performed at a temperature of 680 °C and reactor power of 6 MW. During the entire irradiation, the gas composition in the continuously evacuated ampoule device with samples was recorded. The obtained dependences of the release of tritium-containing molecules and helium during the experiment were qualitatively analyzed. © 2022 The Authors
In this paper, free surface problems of Stefan type for the parabolic heat equation are considered. The analytical solutions of the problems are based on the method of heat polynomials and integral error function in the form of series. Convergence of the series solution is considered and proved. Both one-and two-phase Stefan-type problems are investigated. Numerical results for one-phase inverse Stefan problem are presented and discussed. © 2024 Walter de Gruyter GmbH, Berlin/Boston.
In this study, we systematically study the efficient production method and electrochemical characteristics of activated carbons (AC) derived from rice husk (RH) and walnut shell (WS). In particular, the effectiveness of physical activation using carbon dioxide (CO2) was investigated and compared with the more common chemical activation method using potassium hydroxide (KOH). The results show that the KOH–activated samples have remarkable specific capacities, reaching 157.8 F g−1 for RH and 152 F g−1 for WS at 1 A g−1. However, the rate capability of AC obtained via KOH decreases significantly as the scanning rate increases, retaining only 51.5% and 68% of their original capacities for RH–KOH and WS–KOH, respectively, at 20 A g–1. In contrast, CO2–activated samples show a superior rate performance with a capacity retention of 75.6% for WS and 80% for RH at the same current density. In addition, electrochemical impedance spectroscopy (EIS) analysis shows that AC obtained via CO2 has a lower charge transfer resistance compared to its KOH counterparts. CO2–activated RH and WS electrodes show Rct values of 0.1 Ω and 0.24 Ω, respectively, indicating improved ion transport kinetics and surface area utilization. These results highlight the importance of activation techniques in tailoring the electrochemical behavior of biomass–derived carbon. This study not only expands the understanding of the interaction between activation, morphology, and performance but also indicates the potential of CO2 activation as an environmentally friendly and efficient alternative. As the field of sustainable energy storage advances, this work provides valuable guidance for the development of high–performance supercapacitor electrodes with less environmental impact. © 2023 by the authors.

В статье рассмотрена научно-методическая проблема выбора и применения эффективных геофизических технологий на разных этапах геологоразведочных и горно-геологических работ на урановых месторождениях Казахстана. Основное внимание уделено систематизации физико-геологических и петрофизических характеристик пород и руд Шу-Сарысуской урановой провинции. На основе фондовых геологических материалов, опубликованных данных и статистической обработки были обобщены диапазоны физических свойств пород и скважинных геофизических полей. Полученные результаты показали необходимость более детального изучения проницаемых и непроницаемых пород по электрическим свойствам, плотности и скоростям сейсмических волн для повышения информативности геофизических методов и оптимизации технологий in-situ leaching.

В статье применены методы машинного обучения для выявления и классификации редких и аномальных минералов в крупной минералогической базе данных. С помощью Isolation Forest и One-Class SVM были определены минералы с нетипичными физико-химическими свойствами, после чего KMeans clustering был использован для группировки аномалий в три геологически интерпретируемые категории, связанные с эвапоритовыми, метаморфическими и магматическими условиями формирования. Полученные результаты показывают, что методы unsupervised learning могут повысить эффективность классификации минералов и прогнозирования редких минеральных месторождений.
Показано 129–136 из 1222