MXene derivatives and composites are becoming fresh and promising two-dimensional (2D) materials because of their unique properties, performance, and multifunctionalities. This review covers the general aspects of MXenes (family of 2D transition metal carbides, nitrides, and carbonitrides), their MAX phase (a diverse class of nanolaminate materials with intriguing properties that have received incredible global research attention because they bridge the divide separating metals and ceramics.) precursors, dissimilarities and similarities between MAX phases and MXenes, and special properties of both materials. The important focuses are made on the methods of MXene synthesis and their stability and conductivity, as well as on synthesizing new MXene composites with desired characteristics. The impacts of MXenes in energy storage systems, especially supercapacitors, are discussed based on the high specific surface area, tunable porosity, and optimized inter-layer spacing. Here, various aspects of MXene materials, including properties, synthesis, and applications, have been discussed to highlight their importance for the development of energy storage systems and material science research.
One of the most critical problems faced by modern civilization is the depletion of freshwater resources due to their continuous consumption and contamination with different organic and inorganic pollutants. This paper considers the potential of already discovered MXenes in combination with carbon nanomaterials to address this problem. MXene appears to be a highly promising candidate for water purification due to its large surface area and electrochemical activity. However, the problems of swelling, stability, high cost, and scalability need to be overcome. The synthesis methods for MXene and its composites with graphene oxide, carbon nanotubes, carbon nanofibers, and cellulose nanofibers, along with their structure, properties, and mechanisms for removing various pollutants from water, are described. This review discusses the synthesis methods, properties, and mechanisms of water purification using MXene and its composites. It also explores the fundamental aspects of MXene/carbon nanocomposites in various forms, such as membranes, aerogels, and textiles. A comparative analysis of the latest research on this topic shows the progress in this field and the limitations for the practical application of MXene/carbon nanocomposites to solve the problem of drinking water scarcity. Consequently, this review demonstrates the relevance and promise of the material and underscores the importance of further research and development of MXene/carbon nanocomposites to provide effective water treatment solutions. © 2024 by the authors.
Organic additives with multiple functional groups have shown great promise in improving the performance and stability of perovskite solar cells. The functional groups can passivate undercoordinated ions to reduce nonradiative recombination losses. However, how these groups synergistically affect the enhancement beyond passivation is still unclear. Specifically, isomeric molecules with different substitution patterns or molecular shapes remain elusive in designing new organic additives. Here, we report two isomeric carbazolyl bisphosphonate additives, 2,7-CzBP and 3,6-CzBP. The isomerism effect on passivation and charge transport process was studied. The two molecules have similar passivation effects through multiple interactions, e.g., P = O···Pb, P = O···H–N and N–H···I. 2,7-CzBP can further bridge the perovskite crystallites to facilitates charge transport. Power conversion efficiencies (PCEs) of 25.88% and 21.04% were achieved for 0.09 cm2 devices and 14 cm2 modules after 2,7-CzBP treatment, respectively. The devices exhibited enhanced operational stability maintaining 95% of initial PCE after 1000 h of continuous maximum power point tracking. This study of isomerism effect hints at the importance of tuning substitution positions and molecular shapes for organic additives, which paves the way for innovation of next-generation multifunctional aromatic additives. (Figure presented.) © The Author(s) 2025.

This study introduces a novel YOLO-like multi-branch deep learning architecture designed for accurate apple detection and segmentation in orchard environments, addressing the persistent challenges of occlusion, illumination variability, and fruit clustering. The proposed model integrates an enhanced backbone with C2f modules and a Spatial Pyramid Pooling Fast (SPPF) block to capture multi-scale receptive fields, while a Feature Pyramid Network (FPN) combined with a Path Aggregation Network (PAN) ensures effective top-down and bottom-up feature fusion. To extend beyond bounding box localization, a prototype-based segmentation head is incorporated, enabling precise instance mask generation with reduced computational overhead. The model was comprehensively evaluated on the MinneApple dataset, consisting of high-resolution orchard images with polygonal annotations, and compared against state-of-the-art detection and segmentation frameworks, including Faster R-CNN, Mask R-CNN, SSD, YOLO variants, YOLACT, and SOLOv2. Quantitative results demonstrated that the proposed approach achieved superior mean Average Precision (mAP@0.5 = 0.76), precision (0.83), and F1-score (0.76), while maintaining a competitive inference speed of 40 FPS, confirming its suitability for real-time agricultural applications. Qualitative analysis further highlighted robustness in complex orchard conditions, reinforcing the model’s applicability for automated harvesting, yield estimation, and orchard monitoring. These findings advance the state of agricultural computer vision by unifying detection and segmentation in a lightweight, high-performance framework. © (2025), (Science and Information Organization). All rights reserved.
The rapid pace of development of the world economy requires the progressive improvement of modern energy storage devices such as lithium-ion batteries (LIBs). The main limiting factor in the specific capacity of LIBs is the anode material, which is traditionally graphite. One possible solution is to use SiOx, which has a higher theoretical capacity than commercial carbon. Despite this, SiO2 has several disadvantages that limit its widespread use as an anode material for LIBs due to low electrical conductivity and short cycling life associated with volume changes during alloying–dealloying of lithium ions during charge-discharge. We have proposed an inexpensive and simple method for obtaining amorphous SiO2 particles in a carbon shell to solve these shortcomings. SiO2 was synthesized from biological waste material - rice husks, and the carbon shell was obtained from sucrose, which is also obtained from biomass. Surface morphology, structural analysis, and chemical composition were examined using XRD, thermogravimetric analysis, TEM, SEM, Raman and FTIR. The resulting composite shows a high performance of 450 mAh/g at a current density of 50 mA/g after 50 cycles and high cyclic stability compared to pure SiO2, which at 50 cycles showed 295 mAh/g at a current density of 50 mA/g. The proposed inexpensive and easily scalable method for obtaining a SiO2/C hybrid composite is a possible solution for creating next-generation LIBs. © 2022 Elsevier Ltd
Back-contact design for the architecture of devices is a promising approach to develop high-performance perovskite solar cells. Here, numerical simulation methods are used to investigate device properties of back-contact perovskite solar cells (BC–PSCs) with the quasi-interdigitated, flat-interdigitated, and interdigitated electrode designs. The results highlight the principal differences in the designs of the electrodes and provide an investigation and analysis of the impact of these electrodes on the photovoltaic properties of their BC-PSCs. The effect of the perovskite photoactive layer electronic properties on the performance of BC-PSCs is also investigated. It is revealed that while BC-PSCs with the quasi-interdigitated electrode design can potentially produce power conversion efficiencies (PCEs) well above 25 %, BC-PSCs with the flat-interdigitated and interdigitated electrode designs are more tolerant to electronic imperfections in the perovskite layer and can produce PCEs higher than those in devices with the quasi-interdigitated electrode design. Manufacturing and prospective use of electrodes with the quasi-interdigitated, flat-interdigitated, and interdigitated designs in developing BC-PSCs are discussed from the experimental standpoint. © 2021 Elsevier B.V.

This study presents a comprehensive computational analysis of flow rate efficiency during uranium extraction via the In Situ Recovery method. Using field data from a deposit located in Southern Kazakhstan, a series of mathematical models were developed to evaluate the distribution and balance of leaching solution. A reactive transport model incorporating uranium dissolution kinetics and acid–rock interactions were utilized to assess the accuracy of both traditional and proposed methods. The results reveal a significant spatial imbalance in sulfuric acid distribution, with up to 239.1 tons of acid migrating beyond the block boundaries. To reduce computational demands while maintaining predictive accuracy, two alternative methods, a streamline-based and a trajectory-based approach were proposed and verified. The streamline method showed close agreement with reactive transport modeling and was able to effectively identify the presence of intra-block reagent imbalance. The trajectory-based method provided detailed insight into flow dynamics but tended to overestimate acid overflow outside the block. Both alternative methods outperformed the conventional approach in terms of accuracy by accounting for geological heterogeneity and well spacing. The proposed methods have significantly lower computational costs, as they do not require solving complex systems of partial differential equations involved in reactive transport simulations. The proposed approaches can be used to analyze the efficiency of mineral In Situ Recovery at both the design and operational stages, as well as to determine optimal production regimes for reducing economic expenditures in a timely manner. © 2025 by the authors.
This review explores the potential of MXenes, a novel class of two-dimensional (2D) materials, in advancing energy storage and conservation technologies. MXenes exhibit exceptional physicochemical properties, including a high specific surface area (∼390 m² g⁻¹ for MXene@PPy-800), outstanding electrical conductivity, and robust chemical stability, making them ideal for energy-related applications. In supercapacitors, MXene-based electrodes have demonstrated capacitances exceeding 700 F g⁻¹ at 1 mV s⁻¹, with retention of over 90 % of their initial performance after 10,000 charge/discharge cycles. For lithium-ion batteries, MXenes achieve theoretical capacities ranging from 390 to 600 mAh g⁻¹, depending on the type of MXene material, with experimental reversible capacities often exceeding 400 mAh g⁻¹ at 1C rates and high cycling stability. This review synthesizes recent research efforts on the synthesis, structural characterization, and integration of MXenes into energy storage systems. Findings highlight their versatility as electrode materials for supercapacitors, lithium-ion batteries, and fuel cells, as well as their catalytic potential in solar energy conversion. Despite these advancements, challenges remain unresolved. Scalability of MXene synthesis through selective etching methods continues to be a significant technical and economic barrier. Moreover, while MXene-based devices show high initial performance, further work is needed to improve long-term stability in operational and harsh chemical environments. By providing a comprehensive overview of MXene-based energy systems, this review identifies critical gaps in understanding their electrochemical mechanisms, particularly ion transport and surface interaction dynamics. Addressing these challenges will be key to optimizing MXene properties and enabling their widespread application in efficient and sustainable energy technologies. © 2025
Показано 121–128 из 1222