Throughout the course of Earth’s existence, it has undergone alternating phases of warm periods and ice ages, resulting in a natural greenhouse effect. This effect is crucial for maintaining liquid water and supporting life, as the mean global annual temperature would have been ‒18°C in its absence (Voet and Voet, 2010). However, since the 1800s, human activities have emerged as the primary catalyst for an increase in the concentration of greenhouse gases (GHGs) in the troposphere, leading to significant impacts on global warming and climate change. These activities, such as the combustion of fossil fuels, household, commercial, and industrial practices, as well as deforestation and conventional agricultural activities, contribute to the release of heat-trapping gases (USEPA, 2023). The key GHGs include carbon dioxide (CO2), carbon monoxide (CO), methane (CH4), nitrous oxide (N2O), water vapor, ozone (O3), and fluorinated gases (Table 1). © 2025 Rafiq Islam, AHM Mustafizur Rahman, Heulin Thierry, and Mannava Sivakumar CRC Press is an imprint of Taylor & Francis Group, LLC.

Since the onset of the COVID-19 pandemic, the coronavirus infection (COVID-19) has evolved into a serious global issue, widely discussed and studied by scientists around the world. The complexity of researching and classifying this disease lies in the absence of unified criteria: symptoms vary greatly, diagnostic thresholds fluctuate within wide ranges, and the clinical picture is complex and diverse. It largely depends not only on the patient’s age but also on their prior pathological history, quality of life, and geographical location. Under these circumstances, special attention must be paid to the study of diseases that have become increasingly prevalent, are associated with a high frequency and variety of complications, and have acquired new clinical features following COVID-19. In the course of our study, we systematized the main symptoms most characteristic of patients with cardiovascular pathology and post-COVID syndrome (PCS), comprising the main group (51 patients). The control group consisted of patients with similar cardiovascular conditions but without PCS (94 patients), assessed by clinical and laboratory parameters. In the main group, changes in blood laboratory values were observed, with the most prominent being elevated levels of blood enzymes—LDH, CPK, AST, and ALT. Among these, CPK and LDH were the most significant, which elevated levels indicating prolonged tropism of the virus toward vascular endothelium. The levels of SARS-CoV-2-specific IgG antibodies in both groups reflected the degree of immunological response and overall immune status.

This study experimentally and numerically investigated CO2 adsorption characteristics onto a highly porous activated carbon. Adsorption kinetics and isotherms experiments were conducted using a high-precision thermogravimetric analyzer. The effects of key parameters, specifically adsorbent bed thickness, temperatures, and pressure, were considered. The two isotherm models were employed to correlate the measured data, and they showed a decent fit. Numerical simulations were carried out using COMSOL Multiphysics software under a coupled heat and mass transfer model. The simulated results showed a reasonable agreement with the experimental uptakes for all studied parameters. The results also showed that the diffusion time constant Ds0/Rp2 is pressure-dependent and varies with the adsorbent bed thickness. The Ds0/Rp2 at each adsorption temperature is calculated and fitted with the Arrhenius equation. Estimated averaged values of limiting Ds0/Rp2 for adsorbent bed thicknesses of 0.9, 5, and 25 mm, respectively, equal to 2.18 × 10−1, 8.64 × 10−2, and 2.05 × 10−2 1/s. Linearly increasing adsorbent bed thickness causes a rapid nonlinear drop in Ds0/Rp2. The findings from this research provide valuable information on the mass transfer characteristics of CO2 onto activated carbon. So, engineers can design optimized heating/cooling systems that operate more effectively, resulting in higher efficiency, reduced system costs, and lower carbon emissions. © 2024 The Authors

This paper aims to analyze various indicators to explain the impact of inequality and income on economic growth at the regional level of Kazakhstan. The data collected from the Bureau of National Statistics from 1995 to 2020 examined the impact of country, interregional, and market inequality indices and real income/wage on the GRP of different regions. Applying the methods such as analysis of unique statistical data covering 16 regions of Kazakhstan and log-linear multivariate regression analysis, which was carried out using the STATA software package, evidence was provided on the influence of interregional, country inequality, and income on economic growth. The analysis showed the differential impact of inequality and income. It was found at the first stage that the gap between interregional inequality and country inequality is insignificant. It was identified at the second stage that in models with real incomes, an increase in income has a negative impact on the development of the economy of Kazakhstan. All the models obtained are consistent and have (although not very high) significant explanatory power and confirm the relationship between inequality and economic growth. The findings can help policymakers, regionalists, economists, and governmental bodies understand the importance of income inequality and which areas can contribute to the formation of effective regional policy. © Karina Turkebayeva, Makpal Bekturganova, Orazaly Sabden, Galiya Dauliyeva, Gaukhar Kenzhegulova, 2022.

Cubic halide based perovskite gained the attention of the researchers due to their remarkable optoelectronic contributions. The present work deals with the first principles calculations based on Density Functional Theory for exploring the TlSnX3(X=Cl,Br,I) cubic perovskites. The important physical characteristics are computed within Wien2k using Full Potential Linearized Augmented Plane wave, FP-LAPW method. The structural stability is examined by energy volume optimization. The optimized lattice constant of TlSnCl3, TlSnBr3 and TlSnI3 is 5.58 Å, 5.83 Å and 6.20 Å. The electronic and optical properties are calculated using Generalized Gradient Approximation with Perdew–Burke–Ernzerhof, PBE-GGA, Trans-Blaha modified Becke–Johnson, TB-mBJ and Strongly Constrained and Appropriately Normed, SCAN exchange and correlation functionals. The studied compounds possess direct band gap nature with the band gap of 1.61 eV, 1.08 eV and 0.75 eV with TB-mBJ for TlSnCl3, TlSnBr3 and TlSnI3. The band gap using PBE-GGA(SCAN) potentials for TlSnCl3, TlSnBr3 and TlSnI3 is 0.98 (0.78) eV, 0.67 (0.69) eV and 0.50 (0.48) eV, respectively. The mechanical analysis reveal that these compounds are ductile. The optical characteristics like ε(ω), n(ω), α(ω), R(ω), σ(ω) and L(ω) are calculated by implementing PBE-GGA, TB-mBJ and SCAN XC. High absorption and low reflectivity make these perovskites potential candidates for sustainable energy applications. © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2024.

For the seismically active region of the southern part of the Republic of Kazakhstan, a mathematical model of seismic action has been developed based on the representation of seismic action by a non-stationary random process, which is obtained from a stationary multiplication by a deterministic envelope function. For the territory of the city of Taraz, the seismic regime of its territory and soil conditions were studied. Accelerograms of strong earthquakes were selected from the world database, the source parameters of which correspond to the parameters of past earthquakes. It was found that the calculated sample of accelerograms for the region of Taraz should include instrumental records with acceleration maxima in the range of 124–275 cm/s2, recorded on soils of the second category. For each accelerogram, the parameters of the correlation functions of the random process, the values of the effective duration and the frequency characteristics of the seismic impact are determined. This information allows to perform digital modeling of seismic impact, given as a random process. The results can be used to calculate buildings with various seismic isolation systems, high-rise and extended buildings.

Land use/land cover (LULC) changes significantly impact spatiotemporal groundwater levels, posing a challenge for sustainable water resource management. This study investigates the long-term (2000–2022) influence of LULC dynamics, particularly urbanization, on groundwater depletion in Kabul, Afghanistan, using geospatial techniques. A time series of Landsat imagery (Landsat 5, 7 ETM+, and 8 OLI/TIRS) was employed to generate LULC maps for five key years (2000, 2005, 2010, 2015, and 2022) using a supervised classification algorithm based on Support Vector Machines (SVMs). Our analysis revealed a significant expansion of urban areas (70%) across Kabul City between 2000 and 2022, particularly concentrated in Districts 5, 6, 7, 11, 12, 13, 15, 17, and 22. Urbanization likely contributes to groundwater depletion through increased population growth, reduced infiltration of precipitation, and potential overexploitation of groundwater resources. The CA-Markov model further predicts continued expansion in built-up areas over the next two decades (2030s and 2040s), potentially leading to water scarcity, land subsidence, and environmental degradation in Kabul City. The periodic assessment of urbanization dynamics and prediction of future trends are considered the novelty of this study. The accuracy of the generated LULC maps was assessed for each year (2000, 2005, 2010, 2015, and 2022), achieving overall accuracy values of 95%, 93.8%, 85%, 95.6%, and 93%, respectively. These findings provide a valuable foundation for the development of sustainable management strategies for Kabul’s surface water and groundwater resources, while also guiding future research efforts. © 2024 by the authors.
Water scarcity has been felt in many countries and will become a critical issue in the coming years. The release of toxic organic and inorganic contaminants from different anthropogenic activities, like mining, agriculture, industries, and domestic households, enters the natural waterbody and pollutes them. Keeping this in view in combating the environmental crises, removing pollutants from wastewater is one of the ongoing environmental challenges. Adsorption technology is an economical, fast, and efficient physicochemical method for removing both organic and inorganic pollutants, even at low concentrations. In the last decade, graphene and its composite materials have become the center of attraction for numerous applications, including wastewater treatment, due to the large surface area, highly active surface, and exclusive physicochemical properties, which make them potential adsorbents with unique physicochemical properties, like low density, chemical strength, structural variability, and the possibility of large-scale fabrications. This review article provides a thorough summary/critical appraisal of the published literature on graphene-, GO-, and rGO-based adsorbents for the removal of organic and inorganic pollutants from wastewater. The synthesis methods, experimental parameters, adsorption behaviors, isotherms, kinetics, thermodynamics, mechanisms, and the performance of the regeneration–desorption processes of these substances are scrutinized. Finally, the research challenges, limitations, and future research studies are also discussed. Certainly, this review article will benefit the research community by getting substantial information on suitable techniques for synthesizing such adsorbents and utilizing them in water treatment and designing water treatment systems. © 2022 Elsevier B.V.
This literature review examines the application of Fibre Optic Sensors (FOS) in the structural health monitoring of concrete buildings, an increasing issue in contemporary construction owing to the demand for safer and more resilient infrastructure. This review aims to evaluate the current state of FOS applications and estimate their efficacy. The study employed modelling and experiments with FOS to measure deformations in various concrete samples. FOS, which are thin fibres with an optical cable inside, was used in the study. The sensors were integrated into concrete structures to measure deformations. The research indicates that FOS, specifically Fibre Bragg Gratings, deliver higher reliability and accuracy in quantifying deformations in concrete, surpassing conventional approaches in precision and environmental durability. FOS are non-contact sensors that excel in extreme environments, including elevated humidity and temperature fluctuations, rendering them suitable for monitoring essential infrastructure such as bridges, tunnels, and buildings. The analysis highlights critical challenges, such as the necessity for advanced sensor integration techniques and better calibration procedures to guarantee consistent data accuracy. Moreover, it underscores the possibility of amalgamating FOS with additional monitoring systems to provide comprehensive, real-time structural health management solutions. Although FOS are now utilised in several concrete buildings, the study indicates that more research is necessary to enhance sensor technologies and investigate new applications, including the incorporation of artificial intelligence for data processing. This evaluation underscores the necessity of creating economical, scalable solutions for the extensive application of FOS in building projects. ©2025 by authors, all rights reserved.

After undergoing biological treatment, wastewater still contains substances with endotoxic activity, such as lipopolysaccharide. However, due to the increasing practice of treating wastewater to make it suitable for drinking (potable reuse), the removal of these endotoxic active materials is crucial. These substances can be harmful to human health, leading to a condition called endotoxaemia. Furthermore, environmental endotoxins pose risks to pharmaceutical manufacturing processes and the quality of the final pharmaceutical products. Ultimately, the most significant concern lies with the patient, as exposure to such substances can have adverse effects on their health and well-being. Activated carbon has a proven efficiency for endotoxin removal; rice husk (RH), as a type of natural lignocellulosic agricultural waste, is a unique carbon precursor material in terms of its availability, large-scale world production (over 140 million tons annually), and is characterized by the presence of nanoscale silica phytoliths, which serve as a template to create additional meso/macropore space within the nanoscale range. High surface area RH/lignin-derived honeycomb monoliths were prepared in this study via extrusion, followed by carbonization and physical and chemical activation to develop additional pore space. The nanoporosity of the carbon honeycomb monoliths was established by means of low-temperature nitrogen adsorption studies, using calculations based on QSDFT equilibrium and BJH models, as well as mercury intrusion porosimetry (MIP) and SEM investigations. An alternative method for the elimination of the bacterial lipopolysaccharide (LPS)—a conventional marker—using filtration in flowing recirculation systems and the adsorbent activity of the monoliths towards LPS was investigated. Since LPS expresses strong toxic effects even at very low concentrations, e.g., below 10 EU/mL, its removal even in minute amounts is essential. It was found that monoliths are able to eliminate biologically relevant LPS levels, e.g., adsorption removal within 5, 30, 60, 90, and 120 min of circulation reached the values of 49.8, 74.1, 85.4, 91.3%, and 91.6%, respectively.