
The paper analyzes ways to improve the quality index of the process of obtaining structural beryllium blanks by vacuum hot pressing of beryllium powders with a fineness of less than 56 microns. In the course of the work, the following were carried out: a comparative analysis of the quality of hot-pressed blanks depending on the production period; analysis of the representativeness of the values of the characteristics of powders; studied the dynamics of changes in the chemical composition of beryllium in the process of grinding ingots. The results of studies of the reasons for the instability of the quality of sintered beryllium billets are presented. Using the method of mathematical statistics, the influence of individual factors of industrial production on quality indicators was studied. The results of changes in the chemical composition of beryllium during the grinding of ingots are presented, as well as an assessment of the irreproducibility of the results of analysis of the content of impurities and certification of products by mechanical properties.

The complexation of metal ions with polymer hydrogels has been studied. For the study, polyelectrolyte hydrogels based on hydroxyethyl acrylate, acrylic acid, and chitosan were synthesized, on the surface of which ions of various metals were chemisorbed with the formation of chelate complexes. The formation of complex compounds of the polymer hydrogel with ions of divalent and trivalent metals was confirmed by the data of IR spectra. The dynamics of swelling of a polyelectrolyte hydrogel based on a copolymer of acrylic acid and acrylamide has been studied. It was found that the swelling coefficient of the formed complexes depends on the nature of the transition metals: ion radius, electronegativity. New polymer-silicate composite materials have been obtained by intercalation polymerization of synthetic monomers. As a silicate component, we used the clay of the Darbazinsky deposit, previously activated with a 5% sodium carbonate solution. The composites were synthesized in the presence of a crosslinking agent at a temperature of 333.15 K for 1 hour. The formation of the target products is confirmed by the data of IR spectra and the kinetics of swelling.

Due to the change in the composition of the processed raw materials at the Balkhash Copper Plant (BCP), it is required to adjust the technology used to melt copper sulfide concentrates in the Vanyukov furnace (VF). It is promising to use additional carbon-containing fuel that burns in the bubbling zone increasing the melting temperature and partially reducing slag oxides to ensure the required autogenousity and melting temperature. However, part of the solid fuel does not burn in the bubbling zone with an oxygen-containing blast and does not participate in reduction reactions with slag oxides that result in its accumulation on the surface of the slag melt. The results of the industrial tests performed earlier in the BCP to feed coal dust through tuyeres to the VF with the purpose to maintain the required temperature of the slag melt and satisfactory separation of slag and matte were considered. The reasons for the unstable operation of the tested system to feed coal dust to the VF through tuyeres were determined, and directions for its improvement were outlined. Laboratory experiments were performed to simulate the behavior of coal dust in the quiet zone of the VF. The regularities of the distribution of coal dust were determined, and it was shown that coal dust was concentrated on the slag melt surface. Thus, coal dust that did not react with blast oxygen or oxides of the slag melt in the bubbling zone was carried to the surface of the slag melt, promoted the formation of a viscous crust, and then practically did not interact with the slag melt and becomes practically useless.

This article reflects the results of spectral analysis for use in production as a second product by creating a briquette of dust formed during the melting of ferrosilicoaluminium alloy. Briquettes made according to two samples were made with isothermal retention in the Tamman furnace and spectral analysis of the resulting products was carried out. As a result of the analysis, it was found that the dust contains the main silicon and aluminum oxides not in the form of kaolinite (Al2O3∙2SiO2∙2H2O), but separately in the form of SiO2 and Al2O3, as well as the absence of mullite (3Al2O3∙2SiO2) during heating to a temperature of 1600°C and the formation of silicon carbide SiC at once, as well as a total of 43.73% carbide. As a result, raw materials were obtained that optimize the electric model of the melting process, solving environmental and economic problems with the return to production of the left dust as briquette waste.

This article discusses modern technologies for protecting corporate networks. Using corporate network protection technologies, software developers can guarantee the security of software where it will be used. But there are attacks for which a network system engineer should have the best means of protection.

The article describes the role of the theory of differential equations in modern mathematics and its application. To describe its place in modern mathematical science, first of all, the main features of the theory of differential equations, consisting of two broad areas of mathematics: the theory of ordinary differential equations and the theory of partial differential equations, are highlighted. The first feature of this theory is its close connection with applications. It is noted that the theory of differential equations is primarily based on the formulation and understanding of quantitative and qualitative laws that make up the content of the natural sciences as an integral part of natural science. The article also emphasizes the second feature of the theory of differential equations, its connection with other areas of mathematics, such as functional analysis, algebra and probability theory. The purpose of this article is to identify modern problems in the theory of differential equations and to construct a system of corresponding problems.

This article analyzes the results of a numerical study of the effect of the initial injection mass and the initial temperature of the oxidizer on the tridecane (C13H28) combustion process. During the research work, the KIVA software package was used. Based on the results of the performed numerical simulation, the distribution of the temperature of the fuel droplets and the concentration of CO2 were obtained for various values of the mass of injected liquid fuel in the combustion chamber. After analyzing the results of the study, it turned out that the effective initial mass of fuel injection is 9 mg. Having studied the dependence of the maximum temperature and concentration of carbon dioxide in the combustion chamber, formed as a result of fuel combustion, on the initial temperature of the oxidizer in the combustion chamber, it was concluded that the value of the effective initial temperature of the oxidizer is 900 K.

At the present time, during the construction of automobile roads, one of the main indicators of the quality of the road is the geodetic calculation of the accuracy of the altitudinal position. Examples of permissible errors of maximum deviations are given, taking into account the accuracy of technological processes in the construction of structural layers of automobile road surfaces. In addition, these calculations make it possible to determine with high accuracy the root-mean-square errors of technological processes and the normative-permissible maximum errors of the altitudinal position of the structural layers of the roadbed. Accuracy standards for automobile road surfaces are regulated by standards (GOSTs), building codes and regulations (SNiP), design and engineering documentations.

The work is devoted to the determination of reservoir properties of carbonate rocks, using new modern GIW methods (geophysical investigations of wells). The main approaches that determine the physical and mechanical properties (PHMP) of reservoir rocks, the acoustic anisotropy of rocks associated with cavernosity and fracturing, as well as the permeability of rocks, as well as the characteristics of field productivity, the main properties of formations, liquids and gases saturating productive horizons are specified. The relevance of the work is due to the determination of reservoir properties in fractured-cavernous and fractured carbonate rocks of the "Zhanazhol Yuzhny" deposit using new GIW methods. It should be emphasized that the use of the recommended modern GIW methods makes it possible to more accurately determine the parameters and reservoir properties (FCP) of complex carbonate deposits.

Understanding and managing groundwater resources requires the integration of a large amount of high-quality data from various sources. Due to the limitations in access to information related to groundwater and subsurface conditions, the collection of available existing information is crucial when conducting a successful hydrogeological study. An approach to the development of a groundwater database is presented here. This spatial geodata database, implemented in GIS, is associated with a relational one. Since the basis of the information and analytical system for monitoring irrigated lands is a database, it allows the user to request relevant information. In addition, stratigraphic data stored in a spatial database can be used to build 3D models of underground structures. To store and analyze such a large amount of information, a system organization and automation of processing of many processes are required, so information support is an important part of monitoring.