
The purpose of this article is to consider the main types of failures of load-bearing parts of traction rolling stock, which have a significant impact on the operational reliability and safety of railway transport. In the bearing components of the mechanical part of locomotives, both gradual and sudden failures may occur. The analysis of the causes of failures, fatigue failures, wear, corrosion damage, and manufacturing defects has been performed. Gradual failures arise due to the accumulation of fatigue damage. The methods of increasing the life of the bearing elements and improving the design are proposed. Sudden failures are defined as those associated with a reduction in the safety margin of long-term (static) or impact strength below the permissible value. According to these studies, the probability of a sudden failure is determined as the probability that the random value of the applied static stress exceeds the random value of some characteristic of the material's strength, σR, which refers to the yield strength or tensile strength, σb. The results of this study can be used in the development of technical measures for the maintenance and repair of locomotives.

The article is a review article devoted to the devices and methods of their use for the experimental study of the stress-strain state of the earth bed of road and railway embankments, approach embankments to bridges, and transport interchanges. Today, an important task in the construction of embankments is the determination of the expected settlement. To measure the stresses in the soil mass of the roadbed, sensors based on strain gauges (Messdozes) are used. The authors consider several types of messdozes according to the ‘classical scheme’, analyze the revealed disadvantages of different designs during laboratory and field tests, and describe the ways of their elimination. The advantages of the modernized scheme of messdozes are described, and the calibration of the modernized sensors (Messdozes) is considered. Modernized sensors have been tested by students of the scientific circle ‘Transport constructions’ under the direction of Associate Professor Bondar I.S. during a series of laboratory experiments carried out on the basis of the testing laboratory ‘Testing of track and artificial constructions’ of ALT University named after Mukhamedjan Tynyshpaev, Almaty.

The purpose of this article is the mathematical modeling of a spring-friction set of a freight car trolley depending on the profile of the railway track. The article uses the methodology of the results of the generalized model of power interaction of friction pairs "pressure beam-friction wedge" and "friction wedge-friction bar" of the spring-friction set of the cart 18-578 in the mechanical system "track-car-load," in a particular case cart from which such models of the e of the freight car 18 100 can be obtained. The manuscript contains a software study using a computer simulation of a freight wagon trolley, which complements the experimental studies. The mathematical (symbolic) method in the computer algebra system MathCAD (a type of computer-aided design system) is used to solve the equations of equilibrium of the supercharger beam as a real object. In the course of the experimental study, a computational mathematical model of the force action of friction pairs of spring-absorbing trolley apparatuses was developed, and the results of calculations of the reaction of the friction bar to the friction wedge were mathematically obtained. The optimal parameters were obtained analytically, and the indicators of the angles of inclination of the contact surfaces of the trolley of the freight car were justified.

The purpose of the article was to present the results of braking equipment testing and determination of the adequacy of compressed air production of the braking system when the train is loaded. Experimental tests of the braking system of TE33A diesel locomotive in a goods train are performed. According to the initial data the main parameters of the braking system in the empty and loaded train were evaluated. As a result of tests, and according to the calculated data, the dependences of the volume of the main reservoirs, and the dependences of the required compressor capacity, on the number of axles have been obtained. It has been established that the braking system operation in release modes for a 400-axle train corresponds to the operating conditions and the main requirements of the normative documents.

The indicators of dynamic qualities that ensure the traffic safety, as well as the permissible impact on the railway track, with the obligatory fulfillment of which the railway rolling stock can be used in the transportation process, are presented in this article. The purpose of this work was to carry out the complex dynamic (running), and the impact on the railway track, tests of the rolling stock, during which simultaneous registration of dynamic processes on the railway rolling stock, and in the elements of the superstructure of the track, is carried out, as well as in elements of turnouts. Dynamic tests were carried out on the track switches from the minimum speed to the maximum possible speed of 50 km/h by the TE33A diesel locomotive during the freight traffic. Meeting the requirement of reproducibility of test conditions and having a typical design of the track structure on wooden or reinforced concrete sleepers.

The paper considers the comparative analyses of machine learning algorithms for dataset: cardio_train.csv from kaggle.com (link: https://www.kaggle.com/sulianova/cardiovascular-disease-dataset).Moreover, using machine learning algo-rithms there will be discovered the best accuracy algorithms for the cardio_train.csv. Considering procedures have done in Python 3.0 programming language, which represents confusion matrix and classification report, in order to see precision score, recall, f1-score, and support. Furthermore, in this paper you are able to see following classification models: KNN algorithm, Logistic Regression, Decision Tree, Random Forest, Naïve Bayes and SVM. As a result, it will be defined the superior accura-cy for processing medical dataset.

Perovskite solar cells (PSCs), prepared by using solution-processed printing techniques, gained much attention over the past few years and a considerable progress has been achieved in improving the power conversion efficiencies of these devices. Nevertheless, there are still some advancements that can be implemented, especially in terms of passivation of surface defects in the perovskite photoactive layer. Passivation can afford considerable reduction in surface recombination of charge carriers in the photoactive layer and help to obtain devices with better performance. In this work, poly(3-hexylthiophene-2,5-diyl)-based inks with small amount of pyridine as an additive are used to deposit the hole transport layer and simultaneously passivate the surface defects of the perovskite layer in flexible and printed PSCs. The devices are fabricated on flexible conductive plastic substrates using a slot-die coating method. It is found that 2.5 wt.% pyridine-containing inks for preparing hole transport layer have a positive effect on the performance of resulting PSCs. On average, around 13% improvement in the power conversion efficiency is observed for the devices with passivation as opposed to the reference devices without passivation. The effect of pyridine passivation on the structural and electronic properties of the perovskite layer on a flexible substrate is studied using experimental and analytical techniques, whereas the computer simulation methods are employed to rule out the possible mechanisms for the performance improvements in the devices with passivation. The approach presented here can be useful for developing simplified protocols for printing of flexible PSCs with the passivated perovskite layer and improved device efficiency.

The paper provides an overview of the technological equipment of automated control systems for the crushing process. It is established that the choice of the technological scheme of ADSP depends on the type of processed raw materials, its physical characteristics, requirements for the quality and purpose of the finished product, the required ratio of cuboid grain, the planned capacity. And also found that the task of automatic control of process of crushing is to maintain a given size of the final product and to maximize input to crushing units of energy by optimum loading of the crusher, as well as obtaining the highest possible performance crushing units and maximum utilization of the input to crushing units of energy by optimum loading of the crusher, and the highest possible performance in the final product at the maximum loading of the crushing chamber crushers.

Tien-Shan seismogen (TSS) is the modern mobile macro-fissure structural heterogeneity of lithosphere within which geodynamical processes occur accompanying intensive tectonic movements in earth’s crust and seismic phenomena [10]. The TSS is distinguished as a whole structural formation in the area of the joint structure of the Urals and Western Siberia with the structures of Central Asia by means of a complex of interpretation and analysis of a whole range of materials: geological, geophysical, etc. [1]. In order to study the current geodynamics of the structural irregularities of the Earth’s crust in the territory of North Tien Shan, which is the most seismically active in Central Asia, comprehensive geophysical studies are being conducted. Monitoring consists of three permanent observation points with a 24-hour programme. Those points are situated on seismic active part of Northern Tien-Shan. Kurty point is located in flat part of monitoring area (area with weak seismicity of the earth’s crust) and other points, Turgen and Medeo are located in seismic active part of Tien-Shan. Strainmeters are oriented in the North-South and East-West directions. Based on the experimental data obtained at Kurty, Medeo and Turgen points the bank of data was created. It contains hourly, daily, monthly and annual average values of deformations calculated by directions C-Y and B-3, as well as their modules. In this paper, the link between the deformation of rocks and atmospheric processes (the link between rock deformation and concentration density of electrons in ionospheric layers) are researched. According to trends, electron concentration in E layer increases but in higher layers decreases. Rock deformation in Medeo and Turgen area changes synchronously with the dynamics of the electron concentration in E layer and in Kurty area is antiphase. As a result, it is possible to trace the dependencies and links between the deformation of rocks and the geophysical and fluid processes of the Earth's crust, which, after analyzing and interpreting the data obtained experimentally, can be traced.

Railway transport is one of the basic modes of transport and the economy as a whole for the Republic of Kazakhstan. It is this type of transport that ensures the transportation of a significant amount of dangerous goods of various properties. Failure to observe safety measures and precautions during their transportation may pose a threat to railway workers, the public, as well as to the environment. Transport safety is the highest priority of various parts of the railway transport. Safety depends on the synergistic interaction of many components of the transport process – the properties of the cargo, the technical condition of the rolling stock, the track and infrastructure of the railways, the qualifications of workers, the state of the environment, and the like. This article discusses the ecological problems in railway transport, their negative impact on the environment.